fund-agent-wallet — скилл для Claude Code: обзор и установка

---
name: fund-agent-wallet
description: "Fund a Circle agent wallet with USDC via the `circle` CLI. payments are gas-abstracted. users can pay with USDC only, no ETH required. Covers two top-level paths — fiat on-ramp (buy USDC with USD/credit card) and crypto transfer (send existing USDC to the wallet via QR or direct address). Also covers Gateway deposits (eco vs direct sub-paths) for the Nanopayments balance used by paid services. Use when the user wants to add USDC to their agent wallet, top up after a low balance, deposit into Gateway, or pick the right funding method. Triggers on: fund agent wallet, add USDC, fiat on-ramp, Gateway deposit, eco deposit, direct deposit, top up wallet, withdraw USDC, nanopayments."
allowed-tools: ["Bash(circle wallet status*)", "Bash(circle wallet list*)", "Bash(circle wallet balance*)", "Bash(circle gateway balance*)", "Bash(circle wallet fund *)", "Bash(circle gateway deposit*)", "Bash(circle gateway withdraw*)", "Bash(circle wallet transfer*)", "Bash(circle bridge transfer*)", "Bash(circle blockchain*)", "Bash(circle feedback submit*)"]
requirements:
  runtimes: []
  connectors: []
---

## Overview

For an overview of the Circle CLI's **full** capability set — bridging, smart contract execution, x402 payment, and more — see the `use-circle-cli` master skill. This skill is the narrower funding flow.

Funding an agent wallet means putting USDC where the CLI can spend it. There are **two balance pools** to be aware of:

- **On-chain (vanilla x402)** — USDC sitting at the wallet address on a specific chain. Each chain is separate. Used to pay endpoints whose `accepts[]` does not include `GatewayWalletBatched`. Settles in one block.
- **Nanopayments (powered by Gateway)** — USDC held off-chain in your Circle Gateway balance, batched and settled for you across supported chains. Per source chain — no cross-chain pooling at payment time. Used to pay endpoints whose `accepts[]` includes `GatewayWalletBatched`. Settles in <500ms once the balance exists.

### Gas note
**Agent wallet payment flows are gas-abstracted** — users can pay with USDC without pre-funding native gas. 

This skill covers funding both pools. Pick the path with the shortest time-to-result and hide chain complexity from the user.

## Prerequisites

```bash
# Confirm session is good
circle wallet status

# Get the wallet address
circle wallet list --chain ARC --type agent --output json

# Check current on-chain balance (per chain)
circle wallet balance --address <addr> --chain ARC --output json

# Check current Gateway balance (per chain)
circle gateway balance --address <addr> --chain ARC --output json
```

If `circle wallet status` errors with "Not logged in" or "Terms acceptance is required", hand off to the `use-agent-wallet` skill — it covers install, terms, login, and wallet creation.

## Step 1 — Pick a funding path

Ask the user: *"How would you like to fund your wallet?"*

- **Fiat (USD or local currency)** — Buy USDC with a card or bank transfer via the CLI's built-in fiat on-ramp. Best for users who don't have crypto yet.
- **Existing USDC** — Send USDC from a wallet they already have (MetaMask, Coinbase, Phantom, etc.). Faster and free of on-ramp fees.
- **Gateway deposit (advanced)** — Move existing on-chain USDC into the Gateway balance for low-latency batched payments. Only useful if the seller they're paying supports Gateway on a specific chain.

**Default recommendation: existing USDC → Arc.** Arc uses USDC as its native gas token (no separate gas asset to hold) and has sub-second finality, so a `direct` Gateway deposit on Arc settles fast — and an eco deposit from BASE lands on Arc too, so either path ends up on the same chain. Use BASE/Polygon when paying sellers that only accept those chains.

## Step 2 — Required flags for non-interactive use

The CLI prompts for missing values when run interactively. **Agents are non-interactive**, so every `circle wallet fund` invocation against mainnet MUST include:

- `--address <addr>` — wallet address from `circle wallet list`
- `--chain <chain>` — e.g. `ARC` (or `BASE`, `MATIC`, …)
- `--method <fiat|crypto>` — without it: `Error: --method is required in non-interactive mode.`
- `--amount <number>` — USDC amount; without it: `Error: --amount is required.`

`--token usdc` is the default and can be omitted, but pass it explicitly when the user asked for USDC specifically.

## Path A — Fiat on-ramp

Opens a fiat on-ramp window in the user's default browser. Funds deposit directly to the wallet on the selected chain.

READ `references/fiat-on-ramp.md` for the `circle wallet fund --method fiat --open` command, settlement notes, and post-purchase balance verification.

## Path B — Crypto transfer (existing USDC)

The user already holds USDC somewhere (another wallet, an exchange, etc.) and wants to send it to the agent wallet.

### Recommended — browser-rendered QR (best UX)

```bash
circle wallet fund --address <addr> --chain ARC --amount 10 --token usdc --method crypto --open
```

`--open` renders the EIP-681 QR code on a local HTML page in the user's default browser. Use this by default. **Terminal-rendered QR codes are frequently truncated or unscannable** inside agent UIs (Claude Code, Codex, etc.); the browser page renders the QR at full resolution and works on both desktop and mobile.

The user scans the QR with any mobile wallet (MetaMask, Coinbase Wallet, Rainbow, Phantom) and confirms the transfer.

### Alternatives — PNG export or manual transfer

If the user can't scan a browser QR, READ `references/crypto-transfer-alternatives.md` (QR-to-PNG via `--export`, manual transfer details including USDC contract addresses).

### Verify after transfer

Verify with `circle wallet balance` after the transfer confirms — see the "Verify after transfer" section of `references/crypto-transfer-alternatives.md`.

## Path C — Gateway deposit (powered by Gateway, advanced)

Only suggest a Gateway deposit when:

- The user has on-chain USDC, AND
- They want to pay a service whose `accepts[]` includes `GatewayWalletBatched` on a specific chain, AND
- That chain is one Gateway supports (Arc, Polygon, BASE, ETH, ARB, OP, AVAX, UNI).

### Eco vs direct — pick eco unless one of four conditions holds

`circle gateway deposit --method eco` deposits BASE vanilla USDC into Gateway and **lands on Arc** (Gateway domain 26) in ~30-50s for a $0.03 flat fee. The follow-up payment is `pay --chain ARC`.

Use `--method direct` **only** when:

1. **The user explicitly asked for direct** — e.g. "deposit on BASE without going to Arc", "stay on BASE", "use direct deposit". Implicit preferences and your own inferences do not count.
2. **The source chain isn't supported by eco** — eco only supports BASE as a source today; check `circle gateway deposit --help` for the current list. Trying an unsupported source returns "Unknown method" or chain-not-supported.
3. **The seller does NOT accept Gateway on Arc** — verify by reading the seller's raw 402 `accepts[]` (not `circle services inspect`). Eco lands on Arc, so if the seller can't pay there (e.g. a Polygon-only Gateway seller), the Gateway balance won't be reachable for this payment; deposit directly on a chain the seller accepts instead.
4. **The user already has vanilla on a fast chain the seller accepts** — `direct --chain <fast-chain>` is fast **only on fast-finality chains (Arc, MATIC, AVAX)** and skips the eco fee. (e.g., user has 5 USDC vanilla on Polygon → `direct --chain MATIC`; or vanilla on Arc → `direct --chain ARC`.)

If none of conditions 1–4 holds, **the answer is eco**. Picking direct anyway is slow on BASE: **direct on BASE (and ETH/ARB/OP/UNI) waits ~13–19 minutes for finality** + gas, vs eco's ~30-50s + $0.03. (The fast timings above are Arc/MATIC/AVAX only — never quote them for BASE.)

### Compare per-workflow, not per-call

Eco's cold-start (~30-50s + $0.03) is paid **once**; every Gateway call after is <500ms. Vanilla has no deposit but every call costs ~2s forever with no amortization. Agentic workflows are rarely single-call, so treat the deposit as one-time wallet onboarding, not a per-call cost. (Time breakeven is ~N=7-13 calls, but Gateway-only seller access and <500ms future calls already win at call 1.)

### Eco deposit (BASE → Arc)

READ `references/gateway-eco-deposit.md` for the `circle gateway deposit --method eco` command (all of `--amount`, `--address`, `--chain`, `--method` are required) and Gateway balance verification.

Once the deposit verifies, hand off to the `pay-via-agent-wallet` skill for the actual payment — that skill owns the `circle services pay` flow (including its allowed-tools whitelist and gotchas).

**Common mistake:** using `--chain BASE` on the `pay` call when the Gateway balance landed on Arc. The chain on `pay` must match where the balance lives.

### Direct deposit and Gateway withdrawals

When a condition for `--method direct` holds (above), or the user wants USDC back out of Gateway, READ `references/gateway-direct-and-withdraw.md` — direct command syntax, supported chains and timings, and the same-chain-only withdraw + `circle bridge transfer` pattern.

## Troubleshooting

On ANY funding error (missing flags, unscannable QR, `Wallet not deployed`, `Insufficient balance`, wrong chain after eco, withdraw limits), READ `references/troubleshooting.md` for the error table and reference links.

If a legacy Eco intent expired, is `WaitingForRefund`, or refunded USDC to `eoaOwnerAddress`, stop funding and hand off to the `recover-eco-funds` skill. Verify the onchain fixed refund recipient before using any executable recovery phase. Current Gateway v2 deposits set `refundRecipient` to the SCA and should use normal status and balance reconciliation instead.

## Rules

- NEVER prompt users to send USDC to addresses you generated. ALWAYS use the user's own wallet from `circle wallet list`.
- NEVER store, log, or display private keys.
- ALWAYS pass `--method <fiat|crypto>` to `circle wallet fund` — agents are non-interactive and the CLI will not prompt.
- ALWAYS pass `--amount <number>` to `circle wallet fund` — confirm the amount with the user first.
- ALWAYS prefer `--method crypto --open` over rendering QR codes in the terminal — terminal QR codes get truncated inside Claude Code, Codex, and similar agent UIs and become unscannable.
- For fiat: use `--method fiat --open` so the on-ramp loads in the browser.
- NEVER suggest a Gateway eco deposit unless you have verified the target service supports Gateway on Arc via the discovery API or the seller's raw 402 `accepts[]`.
- NEVER deposit 100% of the user's vanilla balance into Gateway. The wallet needs vanilla headroom for vanilla-only sellers the user may hit next.
- Sizing formula: `amount = max(price × N + fee + slack, Gateway minimum)`, where N is the workflow's expected call count. Typically reserve ~50% of vanilla as a soft headroom floor. Gateway enforces a server-side minimum deposit; sizing below it returns an error, so floor your suggestion to that minimum. Run `circle gateway deposit --help` for current bounds.
- Surface to the user before depositing when the required amount is materially larger than the workflow's total cost (cheap-endpoint case: $0.0024/call × 5 = $0.012, but the Gateway minimum sets the floor) or above the user's stated `--max-amount` cap. Don't silently deposit ~100× the task cost.
- The first real transaction on a new chain deploys the SCA — there is no dedicated "deploy" command today. Consult `circle wallet --help` for the current options if a `Wallet not deployed` error appears.
- ALWAYS use `--chain` matching where the balance lives. Eco lands on Arc → `pay --chain ARC`. Direct lands on the source chain → `pay --chain <same>`.
- Gateway does NOT do cross-chain transfers at payment time. Source chain matters.
- Abstract chain details from the user unless they explicitly want technical specifics. The user asked to fund the wallet; they don't need a tour of EVM finality.
- If the `circle` CLI itself causes friction during funding (unexpected error, confusing output, missing capability), file feedback per the `use-circle-cli` skill's **Report friction (feedback)** section.

## Alternatives

Trigger the `recover-eco-funds` skill instead when:

- A legacy Eco intent expired, is waiting for refund, or is missing from Gateway.
- Refunded USDC landed at the SCA's API-verified backing EOA.
- The user needs a permissionless Eco self-refund after the onchain deadline.

Trigger the `use-agent-wallet` skill instead when:

- The user has not yet logged in to the CLI or accepted Terms.
- `circle wallet status` errors with "Not logged in" or "Terms acceptance is required".
- The user is asking about wallet setup, login, or session state — not funding.

Trigger the `pay-via-agent-wallet` skill instead when:

- The user wants to call or pay for a paid x402 service.
- Funding has completed and the user is ready to use the marketplace.
- The user mentions `circle services pay`, `circle services search`, or any "pay for" prompt.

Trigger the `agent-wallet-policy` skill instead when:

- The user wants to set spending limits before funding (rare — most users fund first, set limits later).
- The user mentions per-tx / daily / weekly / monthly caps, spending policy, or wallet rules.

For cross-chain USDC moves the agent should use **`circle bridge transfer`** directly — it is part of the Circle CLI (see `references/gateway-direct-and-withdraw.md` for the withdraw-then-bridge pattern).

---

DISCLAIMER: This skill is provided "as is" without warranties, is subject to the [Circle Developer Terms](https://console.circle.com/legal/developer-terms), and output generated may contain errors and/or include fee configuration options (including fees directed to Circle); additional details are in the repository [README](https://github.com/circlefin/skills/blob/master/README.md).