К основному содержанию
скилл CX Codex

create-pr · fcakyon — скилл для Claude Code: что делает и как установить

Скилл create-pr для Claude Code готовит pull request для ревью: проверяет ветку и изменения, собирает результаты проверок и публикует PR через gh.

Apache-2.0 ★ 1 216 обновлён 2026-11-09

Установить в Claude Code · Через маркетплейс плагинов Все способы и платформы ↓
/plugin marketplace add fcakyon/claude-codex-settings
/plugin install github-dev@claude-settings
Открыть на GitHub

Что делает create-pr

Перед созданием PR скилл проверяет инструкции репозитория, состояние Git и целевую ветку. Он учитывает уже подготовленные изменения, не добавляет постороннюю работу в коммит и не коммитит напрямую в main. Перед коммитом запускает /simplify для staged diff; для документационных изменений этот шаг пропускается.

Затем скилл проверяет полный diff относительно базовой ветки, запускает подходящие проверки и фиксирует их реальные результаты. Текст PR записывает во временный файл вне репозитория, а gh получает его через --body-file. После публикации скилл перечитывает заголовок и описание, проверяет форматирование и сообщает ссылку. Для работы нужны настроенный удалённый репозиторий и gh; если fast-forward базовой ветки не проходит, скилл останавливается и сохраняет незакоммиченные изменения.

Какие задачи решает

  • проверить базовую ветку и состав изменений перед PR
  • подготовить заголовок и описание PR с результатами проверок
  • опубликовать PR через gh с явной базовой веткой
  • обновить описание существующего PR без потери вложений и ссылок

Примеры запросов агенту

  • Создай PR для текущей ветки: проверь diff и результаты тестов, затем опубликуй его.
  • Оформи изменения этой ветки как pull request в main и проверь опубликованное описание.
  • Обнови описание существующего PR, сохрани изображения и ссылки.

Как установить create-pr

1Через маркетплейс плагинов

/plugin marketplace add fcakyon/claude-codex-settings
/plugin install github-dev@claude-settings

Команда ставит плагин github-dev целиком, со всеми его скиллами

2Через Skills CLI (Vercel)

npx skills add fcakyon/claude-codex-settings --skill create-pr -a claude-code

3Вручную: положить файлы

~/.claude/skills/create-pr/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/create-pr/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о create-pr

Как установить create-pr в Claude Code?

Для установки отдельно через skills используйте npx skills add fcakyon/claude-codex-settings --skill create-pr -a claude-code.

Что делает скилл create-pr?

Проверяет состояние ветки и изменения, готовит описание pull request с подтверждёнными результатами проверок, затем публикует PR и перечитывает его содержимое.

Что произойдёт, если обновление базовой ветки не удастся?

Скилл останавливается при ошибке fast-forward и не сбрасывает незакоммиченные изменения.

Исходный текст

SKILL.md · Apache-2.0
---
name: create-pr
description: This skill should be used when user asks to "create a PR", "make a pull request", "open PR for this branch", "submit changes as PR", "push and create PR", or explicitly invokes "create-pr".
---

# Create PR

Create a PR a reviewer can understand without reading the conversation. Use extra invocation
text and session findings to explain the problem, final behavior, and evidence. Follow the
user's requested format and the target repo's guidance.

These rules apply to pull requests. For problem-focused issue titles and structured
issue reports, use [create-issue](../create-issue/SKILL.md).

## Workflow

1. **Inspect the scope and base**
   - Read repository guidance and inspect `git status`, staged changes, and the current branch.
   - Honor staged-only requests. Never stage unrelated work or require a new commit when the
     branch already contains the requested changes.
   - Confirm the target remote and base branch. Before creating a branch from main/master,
     fetch that remote and fast-forward the local base with `git merge --ff-only <remote>/<base>`.
     Preserve dirty work and stop if fast-forwarding fails. Do not reset it away.
   - Create a short branch using the repo's naming convention. Never commit directly to main.

2. **Finish and inspect the change**
   - Run `/simplify` on the staged diff before committing and apply its findings, docs-only
     commits included. Follow `commit-staged` for any staged changes.
   - Update existing documentation only when the requested change makes it inaccurate.
   - Review `git diff <remote>/<base>...HEAD` across all commits. For an existing PR, use its
     actual base and head, or `gh pr diff <pr>` if this checkout is on another branch.
   - Run appropriate checks and collect their actual results. Verify session findings against
     the final change, including links, counts, errors, and benchmark provenance.

3. **Write and publish**
   - Use the title and body guidance below. If a PR already exists, use `update-pr-summary`
     rather than opening a duplicate.
   - Write the exact body to a temporary file outside the repo and pass `--body-file` to `gh`.
     Never interpolate text into a shell command or include command output by accident.
   - Push the branch and create with an explicit base, `--title`, `--body-file`, and `-a @me`.
   - Add a reviewer only if explicitly requested or recent PRs by this author have reviewers:
     `gh pr list --repo <owner>/<repo> --author @me --limit 5 --json reviewRequests`.
   - Read back the published title and body with `gh pr view <pr> --json title,body,url`.
     Check code fences, tables, links, and preserved media. For visual changes, open the PR
     and verify the images render. Report the URL and any incomplete verification.

## Title and body

- PR title: start with a capitalized verb and name the concrete behavior, such as
  `Fix copied session text losing line breaks`. No internal brand names or vague claims.
  Add a Conventional Commits prefix (`fix: ...`) only when the repo squash-merges, since
  the title becomes the single commit, and match its recent merged titles. Otherwise use
  no type prefix. Rewrite the title and body when the final scope changes.
- Lead with the trigger and consequence: when does the bug happen, what goes wrong, and why
  does the fix matter? For a feature, show what the user can now do. Skip "This PR" openers.
- Keep distinct points in short bullets, usually 1-3. Do not squeeze several ideas into a
  paragraph or cut useful evidence to satisfy a word count. Small changes may need only
  one sentence and a snippet. Use short sections when reproduction, fix, and results need
  separation. Omit empty or boilerplate sections.
- For bugs, include the smallest useful reproduction, the actual error/output and expected
  behavior, then explain how the final change fixes it. Use exact logs where they show the
  failure. Skip setup noise, raw tool output, and the debugging diary.
- Show behavior with a copyable usage/reproduction snippet, a compact Before/After table,
  or separately labeled fenced Before and After outputs. Prefer these to red/green diff
  lines that force the reviewer to infer the outcome. Do not force snippets onto copy edits.
- Put measurements and main-versus-branch comparisons in a small table. State the dataset,
  workload, or sample count needed to interpret them. Link relevant issues, commits, docs,
  and result artifacts where they support the claim, rather than listing changed files.
- Include concise **completed validation**: the relevant command or check, its result, and
  material limitations or pre-existing failures. A future test checklist is not evidence.
  Do not claim full-run success from a focused check, or understate verified full runs.
- Include only implementation detail that explains the fix or a tradeoff. Mention net line
  counts or base-branch noise when they help distinguish the actual review scope.
- Never add AI attribution, session links, redundant captions, or a concluding sales pitch.

## Visual evidence and existing content

- UI/design changes need readable Before/After images or GIFs in a two-column table. Match
  viewport and scenario, and inspect the visuals before using them. Analysis/plot changes
  need representative outputs and measured results readable at the displayed size.
- Never commit PR screenshots or generated figures into the branch. Follow the user's and
  repo's hosting rules. Where release uploads are permitted, use an existing appropriate
  release and embed its asset URLs. Preserve existing GitHub attachment URLs as well.
- For Ultralytics repos, never upload visuals to release assets. Give the user absolute local
  paths, the PR link, and the sentence/table cell where each image belongs for manual upload.
  Do not invent attachment URLs or claim pending uploads are visible.
- When editing a body, preserve user-uploaded images/GIFs, bot-added context, related links,
  and still-valid evidence unless the user asks to remove them. Edit the relevant portion
  rather than replacing the whole body. Keep proof in the body instead of duplicating it
  in a separate comment.

## Example: bug with completed checks

````markdown
Copying a multiline command into a session loses its line breaks.

| Before | After |
|---|---|
| Pasted command becomes one line | Original line breaks survive |

- Preserve clipboard newlines at paste time
- Reuse the existing text insertion path

**Reproduce**
```sh
printf 'first\nsecond\n' | pbcopy
# Paste into an open session.
```

**Checked:** paste regression passes for multiline and single-line commands.
````

Adapt this shape to the evidence. For UI changes, comparison cells should carry the actual
screenshots/GIFs. For long outputs, use separate fenced blocks outside the table.

© Fatih C. Akyon · Apache-2.0 · fcakyon/claude-codex-settings

Похожие скиллы

Все скиллы по теме «Git и GitHub» →

Сначала — create-pr от других авторов.

create-pr NeoLabHQ Скилл create-pr создаёт черновые пуллреквесты через GitHub CLI по проектному шаблону. Следит за сохранением правок в git и оформляет заголовки с эмодзи. CX Codex +1 1 200установок create-pr zhaono1 Скилл create-pr для Claude Code проводит агента по шагам создания pull request. Синхронизирует английский и китайский README при изменении каталога скиллов. CX Codex +1 678установок create-pr FradSer Скилл create-pr создаёт GitHub pull request после проверок качества и безопасности, а затем передаёт его на мониторинг CI и разбор комментариев. CX Codex +1 109установок create-pr OrchestKit Скилл create-pr создаёт pull request в GitHub после прогона тестов, линтера, типов и проверки безопасности. Срабатывает по явному вызову, обычная команда gh pr create остаётся командой. CX Codex +1 209установок create-pr marcelorodrigo Скилл create-pr оформляет и публикует пулл-реквесты в GitHub по инженерным стандартам через GitHub CLI. CX Codex +1 312установок antfu-create-pr Anthony Fu Скилл antfu-create-pr для Claude Code создаёт GitHub pull request с заголовком Conventional Commits, проверками и скриншотами UI. Запускается по просьбе открыть или подготовить PR. CX Codex +1 919установок pr-create Garrick Aden-Buie (@gadenbuie) Скилл pr-create для Claude Code, Codex, Cursor и других агентов: берёт текущие изменения, создаёт ветку, коммитит, открывает PR на GitHub и следит за CI. Если проверки падают — отлаживает и пушит фиксы до зелёного статуса. CX Codex +1 807установок jackin-create-pr jackin-project Скилл jackin-create-pr открывает pull request для небольшой правки в репозитории jackin❯: типо, обновление зависимости, строчный багфикс. Тело PR собирается по шаблону с готовыми блоками verify-locally. CX Codex +1 469установок create-pull-request davila7 Слэш-команда create-pull-request для Claude Code создаёт pull request через GitHub CLI по шаблону проекта. Запускается, когда ветка готова к ревью и нужно оформить PR в черновик с заполненным описанием. CX Codex +1 411установок create-worktrees davila7 Команда create-worktrees для Claude Code собирает все открытые PR через GitHub CLI и создаёт git worktree для каждой ветки в ./tree/<BRANCH_NAME>. Несколько PR можно ревьюить или дорабатывать параллельно, каждое в отдельном каталоге. CX Codex +1 351установок devkit.github.create-pr Giuseppe Trisciuoglio Команда devkit.github.create-pr для Claude Code создаёт ветку, коммиты по Conventional Commits и pull request на GitHub по заголовку PR, целевой ветке и языку описания. CX Codex +1 ★ 372звёзд репо

Из того же набора113

Весь набор →
supabase-cli Скилл учит агента управлять проектами через Supabase CLI: поднимать локальный стек, писать миграции, тестировать edge functions и генерировать типы TypeScript. CX Codex +1 ★ 1 216звёзд репо payment-testing Правило payment-testing собирает нюансы локальной проверки входа, Stripe, подписок, возвратов и backoffice. Помогает разобраться, почему тестовый сценарий ведёт себя не так, как ожидалось. CX Codex +1 ★ 1 216звёзд репо troubleshooting Правило troubleshooting с чек-листом для диагностики локального стека Polar: занятые порты, Docker, база данных, MinIO и фронтенд-сборка. CX Codex +1 ★ 1 216звёзд репо supabase-js Скилл снабжает ассистента шпаргалками и синтаксисом официального SDK @supabase/supabase-js: от базовых фильтров PostgREST до загрузки файлов и Edge Functions. CX Codex +1 ★ 1 216звёзд репо electron Скилл для управления десктоп-приложениями на Electron (Slack, VS Code, Discord, Figma, Notion, Spotify) через Chrome DevTools Protocol. CX Codex +1 ★ 1 216звёзд репо pull Команда pull для Claude Code синхронизирует локальную конфигурацию, схему базы и Edge Functions со связанным проектом Supabase. Обновляет локальные данные одной командой. CX Codex +1 ★ 1 216звёзд репо hetzner-deploy Скилл hetzner-deploy для управления инфраструктурой Hetzner Cloud через CLI hcloud: серверы, сети, файрволы, балансировщики, DNS-зоны и тома. CX Codex +1 ★ 1 216звёзд репо ui-regression Скилл ui-regression проверяет интерфейсы веб-приложений и браузерных расширений на локальном сервере, стейджинге или проде: сценарии, локализацию, ошибки и вёрстку. CX Codex +1 ★ 1 216звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой