fallow-codex-onboarding — скилл для Claude Code: настройка и старт
Скилл fallow-codex-onboarding для Claude Code автоматизирует первый запуск системы анализа Fallow. Агент проверяет наличие CLI, настраивает параметры области сканирования и проводит первичный аудит кода.
MIT 125 установок ★ 141 обновлён 2026-10-24
npx skills add fallow-rs/fallow-skills --skill fallow-codex-onboarding -a claude-codeЧто делает fallow-codex-onboarding
Этот инструмент помогает развернуть Fallow сразу после добавления плагина в среду разработки. При вызове скилл сначала вызывает fallow_check_install для проверки версии, а если CLI отсутствует, предлагает установить его глобально через npm install --global fallow.
Затем агент проводит настройку через fallow_settings_read и fallow_settings_update, уточняя область сканирования и необходимость исключения тестов или инструментов разработки из отчётов. После завершения конфигурации скилл запускает fallow_analyze, выводит оценку состояния проекта и показывает основные точки взаимодействия: панель мониторинга, вкладку здоровья кода, правила @Fallow и конфигурационный файл .fallowrc.json.
Какие задачи решает
- провести первичный аудит кодовой базы
- настроить область анализа проекта
- подключить конфигурационный файл правил
- установить недостающие зависимости Fallow
Примеры запросов агенту
- Настрой Fallow для этого проекта
- Проведи онбординг в Fallow
- Настрой конфигурацию Fallow
Как установить fallow-codex-onboarding
1Через Skills CLI (Vercel)
npx skills add fallow-rs/fallow-skills --skill fallow-codex-onboarding -a claude-code2Вручную: положить файлы
~/.claude/skills/fallow-codex-onboarding/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/fallow-codex-onboarding/
1Через Skills CLI (Vercel)
npx skills add fallow-rs/fallow-skills --skill fallow-codex-onboarding -a codex2Вручную: положить файлы
.agents/skills/fallow-codex-onboarding/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add fallow-rs/fallow-skills --skill fallow-codex-onboarding -a cursor2Вручную: положить файлы
.cursor/skills/fallow-codex-onboarding/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install fallow-rs/fallow-skills fallow/skills/fallow-codex-onboarding2Вручную: положить файлы
.github/skills/fallow-codex-onboarding/SKILL.md1Через Skills CLI (Vercel)
npx skills add fallow-rs/fallow-skills --skill fallow-codex-onboarding -a gemini-cli2Командой платформы
gemini skills install https://github.com/fallow-rs/fallow-skills --path fallow/skills/fallow-codex-onboardingВручную: положить файлы
.devin/skills/fallow-codex-onboarding/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add fallow-rs/fallow-skills --skill fallow-codex-onboarding -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о fallow-codex-onboarding
Как установить fallow-codex-onboarding в Claude Code?
Выполните команду npx skills add fallow-rs/fallow-skills --skill fallow-codex-onboarding -a claude-code.
Что делает этот скилл?
Он автоматизирует установку параметров Fallow, проверяет корректность работы CLI и проводит первый анализ, показывая разработчику основные функциональные возможности системы.
Что нужно для работы fallow-codex-onboarding?
Требуется установленный fallow CLI в PATH для корректной работы панели инструментов, а также Node.js для работы самого скилла.
Исходный текст
SKILL.md · MIT
---
name: fallow-codex-onboarding
description: >-
Set up the Fallow app in Codex after the plugin is installed: check the
fallow installation, choose the default analysis scope, run the first
analysis, and show the user where the dashboard, the Code Health tab,
@Fallow mentions and the config editor are. Use when the user chooses Set
up for Fallow in Codex, or asks to onboard or configure the Fallow app.
Do not use for setting up lint, format or CI tooling; use fallow-setup for
that.
---
# Set up Fallow in Codex
Use the Fallow app tools. Keep each step short. Ask one question at a time.
## 1. Check the installation
Call `fallow_check_install` with `{}`.
- If it reports a version, continue.
- If fallow is missing, explain that the app runs the fallow CLI locally and
that no code leaves the machine. Offer to install it globally with
`npm install --global fallow`. The sidebar dashboard needs a fallow on PATH,
because the app runs a copy inside the project only within the Codex sandbox
of a thread. Run the install only after the user agrees. Then call
`fallow_check_install` again.
## 2. Choose the defaults
Call `fallow_settings_read` with `{}`. Ask these questions, one at a time.
Skip a question when the user already answered it.
1. "Analyze the whole project by default, or only the files your branch
changed?" Map the whole project to `scope: "full"` and changed files to
`scope: "changed"`.
2. "Leave tests, stories and dev tooling out of the analysis?" Map yes to
`production: true`.
Call `fallow_settings_update` with a `set` object that holds only the changed
values, for example `{"set":{"scope":"changed"}}`. Skip the call when nothing
changed. Report the saved values from the tool result. Do not say that a value
was saved when the call failed.
## 3. Run the first analysis
Call `fallow_analyze` with `{}`. The user sees the dashboard. In two or three
sentences, give the health score, the largest category of findings, and one
finding to start with.
If the result says that no project is known, ask the user to open a project
folder in this thread, then call `fallow_analyze` again.
## 4. Show what the app adds
Tell the user, in a short list:
- **Fallow** in the sidebar opens the full dashboard.
- **Code Health** opens beside a thread and follows the project of that thread.
- Type **@Fallow** in the composer to attach a finding or all findings of a rule.
- Open `.fallowrc.json` or `.fallowrc.jsonc` to edit rules and preview their
impact before saving. `.sarif` files open in a findings viewer.
- Before a commit, ask Codex to audit the branch.
## 5. Offer the next step
If the project has no fallow config file (`.fallowrc.json`, `.fallowrc.jsonc`,
`fallow.toml` or `.fallow.toml`), offer the `fallow-setup` skill to add one and
a CI gate. If the user installed the plugin during another task, continue that
task in this conversation.
© fallow-rs · MIT · fallow-rs/fallow-skills