ds-adopt — скилл для Claude Code: передача незавершённой работы
Скилл ds-adopt для Claude Code подхватывает существующий PR, ветку или тред агента и доводит исходную задачу до конца. Он включается по просьбе забрать или завершить чужую работу.
MIT 534 установок ★ 320 обновлён 2026-10-28
npx skills add aicodeking/deepseek-stack --skill ds-adopt -a claude-codeЧто делает ds-adopt
Скилл изучает PR, ветку или тред целиком: историю коммитов, замечания на ревью и исправления, которые позднее просил внести пользователь. Затем он сверяет текущее состояние Git, фиксирует исходную цель и выбирает, где продолжать работу. По умолчанию создаёт новую ветку с исходными коммитами, а исправления добавляет отдельными коммитами. Для обновления использует ds-revive.
После исправлений скилл запускает исходный сценарий и проверяет результат, записывая команды и вывод. Если нужен PR, он обращается к ds-pr, следит за ним через ds-watch-pr, а для ответов на комментарии использует ds-pr-comments. Исходный PR нельзя редактировать, объединять или закрывать без разрешения. Если цель неясна, скилл задаёт вопрос; после трёх подряд неудачных проверок одной проблемы сообщает о блокере.
Какие задачи решает
- подхватить незавершённый PR и довести исходную задачу до конца
- разобраться в текущем состоянии чужой ветки и замечаниях ревью
- проверить исправление на исходном рабочем сценарии
- сохранить авторство исходных участников в коммитах и PR
Примеры запросов агенту
- Подхвати этот PR и закончи исходную задачу, сохранив авторство участников.
- Забери эту ветку, разберись с текущими изменениями и доведи работу до цели.
- Продолжи этот тред агента и проверь исправление на исходном сценарии.
Как установить ds-adopt
1Через Skills CLI (Vercel)
npx skills add aicodeking/deepseek-stack --skill ds-adopt -a claude-code2Вручную: положить файлы
~/.claude/skills/ds-adopt/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/ds-adopt/
1Через Skills CLI (Vercel)
npx skills add aicodeking/deepseek-stack --skill ds-adopt -a codex2Вручную: положить файлы
.agents/skills/ds-adopt/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add aicodeking/deepseek-stack --skill ds-adopt -a cursor2Вручную: положить файлы
.cursor/skills/ds-adopt/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install aicodeking/deepseek-stack skills/ds-adopt2Вручную: положить файлы
.github/skills/ds-adopt/SKILL.md1Через Skills CLI (Vercel)
npx skills add aicodeking/deepseek-stack --skill ds-adopt -a gemini-cli2Командой платформы
gemini skills install https://github.com/aicodeking/deepseek-stack --path skills/ds-adoptВручную: положить файлы
.devin/skills/ds-adopt/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add aicodeking/deepseek-stack --skill ds-adopt -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о ds-adopt
Как установить ds-adopt в Claude Code?
Выполни npx skills add aicodeking/deepseek-stack --skill ds-adopt -a claude-code. Файл скилла находится по пути ~/.claude/skills/ds-adopt/SKILL.md.
Что делает ds-adopt?
Он подхватывает существующий PR, ветку или тред агента, выясняет исходную цель и завершает работу с проверкой результата. При этом сохраняет авторство исходных участников.
Может ли ds-adopt изменить или закрыть исходный PR?
Нет, скилл не редактирует, не объединяет и не закрывает исходный PR без разрешения.
Исходный текст
SKILL.md · MIT
--- name: ds-adopt description: "Takes over an existing PR, branch or agent thread and finishes its original goal while keeping credit for the first contributors. Use when the user says take over, adopt, pick up or finish this PR, or /ds-adopt." --- Finish someone else's work as if it were yours, but credit them for what they did. ## Steps 1. Read the source PR, branch or thread in full: description, commits, review comments and any later corrections from the user. 2. Find the real current state: the head SHA, uncommitted changes and open review findings. Treat the handoff notes as hints, not facts. 3. Write down the original goal in one sentence. 4. Choose where to work. By default, make a new branch with the original commits on it and add your fixes as separate commits. Continue in place or stack only if the user asked for it. 5. Run `ds-revive` to bring the work up to date with the base branch. 6. Fix what is needed to reach the original goal. Simplify where you can, but keep every intended behavior. 7. Verify on your own. Reproduce the original problem, then show it fixed. Run the real workflow, not only mocked tests. Record the commands and output. 8. Check the source PR again. It may have changed while you worked. 9. If a PR is wanted, file it with `ds-pr`, then watch it with `ds-watch-pr`. Use `ds-pr-comments` for any reply. 10. Report what you inherited, what you changed, how you verified it, how credit was kept and what is still open. ## Stop when - The goal is reached, verified and reported. - The goal is unclear, or finishing it needs a product decision. Ask the user. - Verification fails three times in a row on the same issue. Report the blocker. ## Rules - Keep the original Git authors and co-author trailers. Name the contributors and link the original PR in the description. - If the PR will be squashed, keep human co-author lines in the squash message. Use verified identities only, never guessed emails. - Do not defend the old code because it exists. Do not add unrelated features. - Do not edit, merge or close the original PR without permission. - State plainly what you could not verify.
© aicodeking · MIT · aicodeking/deepseek-stack