design-engineering — скилл для Claude Code: UI и установка
Скилл design-engineering для Claude Code — проектирует анимации и состояния интерфейса, разбирает UI-код компонентов, переходов и модальных окон.
MIT ★ 2 966 обновлён 2026-09-29
/plugin marketplace add rohitg00/pro-workflow
/plugin install pro-workflow@pro-workflowЧто делает design-engineering
Скилл задаёт порядок решений для анимации: сначала нужно понять, нужна ли она, затем определить её цель, easing и длительность. Частота взаимодействия имеет значение: действия с клавиатуры он предлагает оставлять без анимации, а для редких модальных окон допускает стандартные переходы. Это важно для командных палитр и других действий, которые повторяются часто.
В рекомендациях есть настройки CSS-кривых, работа с пружинами для жестов и требования к состояниям компонентов: :active, focus-visible и другим. Также скилл советует учитывать prefers-reduced-motion и использовать согласованные шкалы отступов и типографики.
При проверке UI-кода результат нужно оформить одной Markdown-таблицей с колонками Before | After | Why. Для установки через маркетплейс Claude Code выполните обе команды по порядку.
Какие задачи решает
- подобрать easing для появления меню или смены состояния
- определить длительность анимации компонента
- добавить обратную связь на нажатие
- проверить UI-код и оформить замечания таблицей
- учесть настройку
prefers-reduced-motion
Примеры запросов агенту
- Проверь этот компонент и предложи правки анимации и состояний интерфейса.
- Добавь переход для боковой панели с подходящими easing и длительностью.
- Оцени, нужна ли анимация для этого действия с клавиатуры.
Как установить design-engineering
1Через маркетплейс плагинов
/plugin marketplace add rohitg00/pro-workflow/plugin install pro-workflow@pro-workflowКоманда ставит плагин pro-workflow целиком, со всеми его скиллами
2Через Skills CLI (Vercel)
npx skills add rohitg00/pro-workflow --skill design-engineering -a claude-code3Вручную: положить файлы
~/.claude/skills/design-engineering/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/design-engineering/
1Через Skills CLI (Vercel)
npx skills add rohitg00/pro-workflow --skill design-engineering -a codex2Вручную: положить файлы
.agents/skills/design-engineering/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add rohitg00/pro-workflow --skill design-engineering -a cursor2Вручную: положить файлы
.cursor/skills/design-engineering/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install rohitg00/pro-workflow skills/design-engineering2Вручную: положить файлы
.github/skills/design-engineering/SKILL.md1Через Skills CLI (Vercel)
npx skills add rohitg00/pro-workflow --skill design-engineering -a gemini-cli2Командой платформы
gemini skills install https://github.com/rohitg00/pro-workflow --path skills/design-engineeringВручную: положить файлы
.devin/skills/design-engineering/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о design-engineering
Как установить design-engineering в Claude Code?
Выполните команды по порядку: /plugin marketplace add rohitg00/pro-workflow, затем /plugin install pro-workflow@pro-workflow.
Что делает скилл design-engineering?
Он помогает выбирать анимации, easing и длительность, настраивать состояния компонентов и разбирать UI-код. Для ревью предписан формат одной Markdown-таблицы.
Как скилл предлагает оформлять ревью интерфейса?
Одной Markdown-таблицей, по одной строке на проблему, с колонками Before | After | Why.
Исходный текст
SKILL.md · MIT
--- name: design-engineering description: Apply interface craft when building or reviewing UI - motion, easing, timing, springs, component feel, and visual foundations. Use when building a component, animation, transition, hover or press state, modal, drawer, toast, or when polishing an interface so it feels right. Says "make this feel better", "add an animation", "polish the UI", "review this component". --- # design-engineering In a world where most software works well enough, feel is the differentiator. Most of what makes an interface feel right is detail the user never consciously notices - the aggregate of small correct choices. Build for that aggregate. ## Motion decision framework Answer these in order before writing any animation. ### 1. Should it animate at all? The deciding factor is frequency. The more often a user sees it, the less it should move. | How often the user sees it | Decision | |----------------------------|----------| | 100+ times/day (shortcuts, command palette) | No animation, ever | | Tens of times/day (hover, list nav) | Remove or drastically reduce | | Occasional (modals, drawers, toasts) | Standard animation | | Rare or first-time (onboarding, celebration) | Room for delight | Never animate a keyboard-initiated action. It repeats all day; animation makes it feel slow and disconnected from the keypress. ### 2. What is the purpose? Every animation needs an answer to "why does this move?" Valid ones: spatial consistency (enters and exits the same edge), state change, feedback (a press that confirms the interface heard you), or preventing a jarring appear/disappear. "It looks cool" is not a purpose for anything the user sees often. ### 3. What easing? - Entering or exiting -> `ease-out` (fast start, feels responsive). - Moving or morphing on screen -> `ease-in-out`. - Hover or color change -> `ease`. - Constant motion (marquee, progress) -> `linear`. Never use `ease-in` for UI. It delays the first moment of movement - exactly when the user is watching - so a 300ms `ease-in` dropdown feels slower than a 300ms `ease-out` one. The built-in curves are weak; use stronger custom ones: ```css --ease-out: cubic-bezier(0.23, 1, 0.32, 1); /* UI interactions */ --ease-in-out: cubic-bezier(0.77, 0, 0.175, 1); /* on-screen movement */ --ease-drawer: cubic-bezier(0.32, 0.72, 0, 1); /* iOS-like drawer */ ``` ### 4. How fast? | Element | Duration | |---------|----------| | Button press feedback | 100-160ms | | Tooltip, small popover | 125-200ms | | Dropdown, select | 150-250ms | | Modal, drawer | 200-500ms | Keep frequent, interactive UI under 300ms; the modal and drawer range above (up to 500ms) is the deliberate exception for occasional, first-time surfaces. Perceived speed is real: a faster spinner makes a load feel faster at the same load time, and an instant tooltip after the first one makes a whole toolbar feel quick. ## Springs Springs settle on physics, not a fixed duration, so they feel alive and, unlike CSS keyframes, keep their velocity when interrupted. Reach for them on drag and gesture interactions the user can reverse mid-motion, and on decorative, mouse-tracked motion. Keep bounce subtle (0.1 to 0.3) and usually absent - save it for drag-to-dismiss and playful moments, not functional UI. ## Component feel - **Press feedback.** Any pressable element gets `transform: scale(0.97)` on `:active` with a ~160ms `ease-out` transition. Subtle (0.95 to 0.98); it makes the interface feel like it is listening. - **Never animate from `scale(0)`.** Nothing real appears from nothing. Start at `scale(0.9)` or higher plus opacity so the entrance has shape. - **Scale from the trigger.** Popovers and dropdowns scale from their origin, not their center. Modals stay centered. - **Respect `prefers-reduced-motion`.** Drop or shorten non-essential motion. ## Visual foundations - One spacing scale, one type scale. Consistency reads as intent; ad-hoc values read as noise. - Restrained color: a small palette with clear roles beats many accents. - Make every interactive state explicit - hover, active, focus-visible, disabled. A control with no states feels dead. ## Review format When reviewing UI code, output a single markdown table, one row per issue, with `Before | After | Why`. Do not use separate "Before:" / "After:" lines. | Before | After | Why | |--------|-------|-----| | `transition: all 300ms` | `transition: transform 200ms ease-out` | Name exact properties; avoid `all` | | `transform: scale(0)` | `scale(0.95); opacity: 0` | Nothing appears from nothing | | `ease-in` on a dropdown | strong `ease-out` | `ease-in` reads as sluggish | | no `:active` state | `scale(0.97)` on `:active` | Presses must feel responsive |
© Rohit Ghumare · MIT · rohitg00/pro-workflow