customize · anthropics/claude-for-legal, litigation-legal — скилл для Claude Code: настройка профиля
Скилл customize для Claude Code меняет отдельные параметры профиля юридической практики. Запускается по просьбе обновить профиль или конкретный пункт настроек.
Apache-2.0 ★ 10 060 обновлён 2026-10-23
/plugin marketplace add anthropics/claude-for-legal
/plugin install litigation-legal@claude-for-legalЧто делает customize
Скилл помогает изменить профиль юридической практики, не проходя заново первичную настройку и не редактируя YAML вручную. Он показывает текущие значения, принимает новое значение, объясняет, что изменится в связанных командах, запрашивает подтверждение и записывает правку в конфиг. За один запуск меняется один пункт.
Настраиваются роль, сторона истца или защиты, оценка рисков, стиль документов, контакты для эскалации и пути к рабочим папкам дел. Изменения компании, отрасли, юрисдикций или типа практики записываются в общий профиль и влияют на все 12 плагинов. Перед работой профиль должен быть создан через /litigation-legal:cold-start-interview; скилл не удаляет разделы и сохраняет защитные флаги.
Какие задачи решает
- изменить сторону практики с истца на защиту
- скорректировать порог высокого риска
- обновить стиль юридических документов
- добавить контакт для эскалации по делу
Примеры запросов агенту
- Измени сторону практики на защиту.
- Обнови порог высокого риска для новых дел.
- Добавь контакт для эскалации по делам об интеллектуальной собственности.
Как установить customize
1Через маркетплейс плагинов
/plugin marketplace add anthropics/claude-for-legal/plugin install litigation-legal@claude-for-legalКоманда ставит плагин litigation-legal целиком, со всеми его скиллами
2Через Skills CLI (Vercel)
npx skills add anthropics/claude-for-legal --skill customize -a claude-code3Вручную: положить файлы
~/.claude/skills/customize/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/customize/
1Через Skills CLI (Vercel)
npx skills add anthropics/claude-for-legal --skill customize -a codex2Вручную: положить файлы
.agents/skills/customize/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add anthropics/claude-for-legal --skill customize -a cursor2Вручную: положить файлы
.cursor/skills/customize/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install anthropics/claude-for-legal litigation-legal/skills/customize2Вручную: положить файлы
.github/skills/customize/SKILL.md1Через Skills CLI (Vercel)
npx skills add anthropics/claude-for-legal --skill customize -a gemini-cli2Командой платформы
gemini skills install https://github.com/anthropics/claude-for-legal --path litigation-legal/skills/customizeВручную: положить файлы
.devin/skills/customize/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о customize
Как установить customize в Claude Code?
В Claude Code добавьте маркетплейс командой /plugin marketplace add anthropics/claude-for-legal, затем установите плагин командой /plugin install litigation-legal@claude-for-legal.
Что делает customize?
Он помогает изменить один параметр профиля юридической практики: показывает текущую настройку, запрашивает новое значение и подтверждение, затем записывает правку в конфиг.
Что нужно для работы customize?
Сначала настройте профиль командой /litigation-legal:cold-start-interview. Если конфиг не создан или содержит значения [PLACEHOLDER], скилл направит к этой команде.
Исходный текст
SKILL.md · Apache-2.0
---
name: customize
description: >
Guided customization of your litigation practice profile — change one thing
without re-running the whole cold-start interview. Adjust practice role,
side (plaintiff / defense / mixed), risk calibration, landscape, house
style, escalation contacts, severity vocabulary, or matter workspace
paths. Use when the user says "change my [thing]", "update my profile",
"edit my config", or "customize".
argument-hint: "[section name, or describe what you want to change]"
---
# /customize
## When this runs
The user typed `/litigation-legal:customize`. They want to change something
in their litigation profile — a risk calibration, a house style rule, an
escalation contact, a landscape note — without re-running the whole
cold-start interview and without hand-editing YAML.
## What to do
1. **Read the config.** Read
`~/.claude/plugins/config/claude-for-legal/litigation-legal/CLAUDE.md`
(and `~/.claude/plugins/config/claude-for-legal/company-profile.md` one
level up). If the plugin config does not exist or still contains
`[PLACEHOLDER]` values, say:
> You haven't run setup yet. Run `/litigation-legal:cold-start-interview`
> first — customize is for adjusting a profile you already have.
2. **Show the customizable map.** List what's in the profile, grouped, with a
one-line summary of the current value:
- **Company / who you are** — name, industry, jurisdictions, stage, practice
setting *(shared across all 12 plugins — changes flow through
`company-profile.md`)*
- **Practice role** — in-house counsel / outside counsel / solo / clinic
- **Side** — plaintiff / defense / mixed, and any posture nuances (class
action defense, regulatory enforcement defense, commercial
plaintiff, etc.)
- **Risk calibration** — what counts as high / medium / low risk on an
inbound demand, subpoena, or new matter; escalation triggers
- **Landscape** — regular adversaries, friendly and unfriendly venues,
judges to know, standing OC relationships
- **House style** — brief style, declaration format, demand letter
template, deposition outline structure, legal hold template
- **Severity vocabulary map** — how you translate severity labels across
client / internal / court-facing outputs
- **People** — matter leads, in-house team, outside counsel by matter
type, escalation chain
- **Workflow** — matter workspaces, portfolio log, OC status cadence,
legal hold refresh cadence
- **Integrations** — document storage / e-filing / calendar / Slack
status, fallbacks
3. **Ask what they want to change.**
> What would you like to adjust? Pick a section, or describe the change in
> your own words.
4. **Make the change.** Show the current value, ask for the new value, explain
what changes downstream, confirm, write it to the config.
Examples:
- *Side mixed → defense-only:* "`/matter-intake` will stop asking the
plaintiff-side questions. `/demand-draft` will still work for
defense-side pre-suit demands but the starting frame will be different."
- *Risk calibration tightening high-risk threshold:* "More inbound
demands and subpoenas will route through `/matter-briefing` and
`/oc-status`."
- *New standing OC for IP matters:* "`/oc-status` will include this firm
in weekly sweeps for IP-tagged matters."
5. **For shared-profile changes** (company name, industry, jurisdictions,
practice setting, stage): write to
`~/.claude/plugins/config/claude-for-legal/company-profile.md` and note:
> This change affects all 12 plugins — any plugin that reads your
> jurisdiction footprint now sees [new value].
6. **Close.**
> Done. Your next output will reflect the change. Anything else? You can
> run `/litigation-legal:customize` anytime.
## Guardrails
- **Never delete a section.** If the user wants to "remove" a matter type
from scope, offer to mark it `[Not currently handled]` and explain what
intake routing changes.
- **Flag internal inconsistency.** If the change would make the profile
inconsistent (e.g., plaintiff-only side + defense-only OC roster; or
"high volume" portfolio + no matter workspaces configured), flag the
tension.
- **Flag guardrail degradation.** The FRE 408 / privilege gate on
`/demand-draft`, the privilege header on matter outputs, source
attribution tags, and `[verify]` tags on cited authorities are load-
bearing — do not remove. The `[review]` flag and the "do not file
without attorney review" framing are load-bearing.
- **One change at a time.** Don't re-ask the whole interview.
© Anthropic · Apache-2.0 · anthropics/claude-for-legal
Похожие скиллы
Все скиллы по теме «Настройка агента: память, контекст, субагенты» →Сначала — customize от других авторов.