build-iphone-apps — скилл для Claude Code: обзор и установка
Скилл build-iphone-apps создаёт нативные приложения для iPhone на Swift через интерфейс командной строки без запуска Xcode. Ведёт разработку от макета до релиза в App Store.
MIT ★ 1 988 обновлён 2026-04-01
/plugin marketplace add glittercowboy/taches-cc-resources
/plugin install taches-cc-resources@taches-cc-resourcesЧто делает build-iphone-apps
Скилл превращает Claude Code в мобильного разработчика, работающего по роли: пользователь задаёт требования и проверяет интерфейс, а агент пишет код и прогоняет тесты. Рабочий процесс опирается на консольные утилиты xcodebuild, xcrun simctl и утилиту xcsift. Агент ориентируется на iOS 26 с поддержкой обратной совместимости до iOS 18, используя SwiftUI и UIKit.
Внутри заложены готовые маршруты для создания проекта с нуля, исправления ошибок, внедрения новых экранов, написания тестов, профилирования и отправки сборки в TestFlight. После каждого изменения агент компилирует код под симулятор iPhone 16 и сразу проверяет запуск.
Без установленных инструментов командной строки Xcode и настроенного симулятора в macOS агент не сможет собрать бинарник и проверить запуск.
Какие задачи решает
- собрать нативное iOS-приложение на Swift без открытия графического Xcode
- прогнать модульные тесты через консольный xcodebuild и симулятор
- проверить запуск и внешний вид экрана в xcrun simctl
- подготовить и отправить сборку в TestFlight или App Store
Примеры запросов агенту
- Создай новое iOS-приложение для учёта привычек на SwiftUI
- Найди и исправь утечку памяти в сервисе загрузки данных
- Подготовь проект к отправке в TestFlight и проверь сборку
Как установить build-iphone-apps
1Через маркетплейс плагинов
/plugin marketplace add glittercowboy/taches-cc-resources/plugin install taches-cc-resources@taches-cc-resourcesКоманда ставит плагин taches-cc-resources целиком, со всеми его скиллами
2Через Skills CLI (Vercel)
npx skills add glittercowboy/taches-cc-resources --skill build-iphone-apps -a claude-code3Вручную: положить файлы
~/.claude/skills/iphone-apps/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/iphone-apps/
1Через Skills CLI (Vercel)
npx skills add glittercowboy/taches-cc-resources --skill build-iphone-apps -a codex2Вручную: положить файлы
.agents/skills/iphone-apps/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add glittercowboy/taches-cc-resources --skill build-iphone-apps -a cursor2Вручную: положить файлы
.cursor/skills/iphone-apps/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install glittercowboy/taches-cc-resources skills/expertise/iphone-apps2Вручную: положить файлы
.github/skills/iphone-apps/SKILL.md1Через Skills CLI (Vercel)
npx skills add glittercowboy/taches-cc-resources --skill build-iphone-apps -a gemini-cli2Командой платформы
gemini skills install https://github.com/glittercowboy/taches-cc-resources --path skills/expertise/iphone-appsВручную: положить файлы
.devin/skills/iphone-apps/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о build-iphone-apps
Как установить build-iphone-apps в Claude Code?
Выполните в сессии Claude Code команду /plugin marketplace add glittercowboy/taches-cc-resources, а затем установите плагин командой /plugin install taches-cc-resources@taches-cc-resources.
Что делает скилл build-iphone-apps?
Он ведёт полный цикл разработки iOS-приложений на SwiftUI и UIKit через консоль: создаёт проекты, правит код, выполняет верификацию в симуляторе и готовит релизы.
Нужен ли запущенный Xcode для работы скилла?
Графический интерфейс Xcode не требуется, однако в системе должны быть установлены утилиты xcodebuild и xcrun simctl для сборки и запуска приложения в симуляторе.
Исходный текст
SKILL.md · MIT
---
name: build-iphone-apps
description: Build professional native iPhone apps in Swift with SwiftUI and UIKit. Full lifecycle - build, debug, test, optimize, ship. CLI-only, no Xcode. Targets iOS 26 with iOS 18 compatibility.
---
<essential_principles>
## How We Work
**The user is the product owner. Claude is the developer.**
The user does not write code. The user does not read code. The user describes what they want and judges whether the result is acceptable. Claude implements, verifies, and reports outcomes.
### 1. Prove, Don't Promise
Never say "this should work." Prove it:
```bash
xcodebuild -destination 'platform=iOS Simulator,name=iPhone 16' build 2>&1 | xcsift
xcodebuild test -destination 'platform=iOS Simulator,name=iPhone 16'
xcrun simctl boot "iPhone 16" && xcrun simctl launch booted com.app.bundle
```
If you didn't run it, you don't know it works.
### 2. Tests for Correctness, Eyes for Quality
| Question | How to Answer |
|----------|---------------|
| Does the logic work? | Write test, see it pass |
| Does it look right? | Launch in simulator, user looks at it |
| Does it feel right? | User uses it |
| Does it crash? | Test + launch |
| Is it fast enough? | Profiler |
Tests verify *correctness*. The user verifies *desirability*.
### 3. Report Outcomes, Not Code
**Bad:** "I refactored DataService to use async/await with weak self capture"
**Good:** "Fixed the memory leak. `leaks` now shows 0 leaks. App tested stable for 5 minutes."
The user doesn't care what you changed. The user cares what's different.
### 4. Small Steps, Always Verified
```
Change → Verify → Report → Next change
```
Never batch up work. Never say "I made several changes." Each change is verified before the next. If something breaks, you know exactly what caused it.
### 5. Ask Before, Not After
Unclear requirement? Ask now.
Multiple valid approaches? Ask which.
Scope creep? Ask if wanted.
Big refactor needed? Ask permission.
Wrong: Build for 30 minutes, then "is this what you wanted?"
Right: "Before I start, does X mean Y or Z?"
### 6. Always Leave It Working
Every stopping point = working state. Tests pass, app launches, changes committed. The user can walk away anytime and come back to something that works.
</essential_principles>
<intake>
**Ask the user:**
What would you like to do?
1. Build a new app
2. Debug an existing app
3. Add a feature
4. Write/run tests
5. Optimize performance
6. Ship/release
7. Something else
**Then read the matching workflow from `workflows/` and follow it.**
</intake>
<routing>
| Response | Workflow |
|----------|----------|
| 1, "new", "create", "build", "start" | `workflows/build-new-app.md` |
| 2, "broken", "fix", "debug", "crash", "bug" | `workflows/debug-app.md` |
| 3, "add", "feature", "implement", "change" | `workflows/add-feature.md` |
| 4, "test", "tests", "TDD", "coverage" | `workflows/write-tests.md` |
| 5, "slow", "optimize", "performance", "fast" | `workflows/optimize-performance.md` |
| 6, "ship", "release", "TestFlight", "App Store" | `workflows/ship-app.md` |
| 7, other | Clarify, then select workflow or references |
</routing>
<verification_loop>
## After Every Change
```bash
# 1. Does it build?
xcodebuild -scheme AppName -destination 'platform=iOS Simulator,name=iPhone 16' build 2>&1 | xcsift
# 2. Do tests pass?
xcodebuild -scheme AppName -destination 'platform=iOS Simulator,name=iPhone 16' test
# 3. Does it launch? (if UI changed)
xcrun simctl boot "iPhone 16" 2>/dev/null || true
xcrun simctl install booted ./build/Build/Products/Debug-iphonesimulator/AppName.app
xcrun simctl launch booted com.company.AppName
```
Report to the user:
- "Build: ✓"
- "Tests: 12 pass, 0 fail"
- "App launches in simulator, ready for you to check [specific thing]"
</verification_loop>
<when_to_test>
## Testing Decision
**Write a test when:**
- Logic that must be correct (calculations, transformations, rules)
- State changes (add, delete, update operations)
- Edge cases that could break (nil, empty, boundaries)
- Bug fix (test reproduces bug, then proves it's fixed)
- Refactoring (tests prove behavior unchanged)
**Skip tests when:**
- Pure UI exploration ("make it blue and see if I like it")
- Rapid prototyping ("just get something on screen")
- Subjective quality ("does this feel right?")
- One-off verification (launch and check manually)
**The principle:** Tests let the user verify correctness without reading code. If the user needs to verify it works, and it's not purely visual, write a test.
</when_to_test>
<reference_index>
## Domain Knowledge
All in `references/`:
**Architecture:** app-architecture, swiftui-patterns, navigation-patterns
**Data:** data-persistence, networking
**Platform Features:** push-notifications, storekit, background-tasks
**Quality:** polish-and-ux, accessibility, performance
**Assets & Security:** app-icons, security, app-store
**Development:** project-scaffolding, cli-workflow, cli-observability, testing, ci-cd
</reference_index>
<workflows_index>
## Workflows
All in `workflows/`:
| File | Purpose |
|------|---------|
| build-new-app.md | Create new iOS app from scratch |
| debug-app.md | Find and fix bugs |
| add-feature.md | Add to existing app |
| write-tests.md | Write and run tests |
| optimize-performance.md | Profile and speed up |
| ship-app.md | TestFlight, App Store submission |
</workflows_index>
© Lex Christopherson · MIT · glittercowboy/taches-cc-resources