К основному содержанию
скилл CX Codex

bmad-sprint-planning — скилл для Claude Code: планирование спринта

Скилл bmad-sprint-planning для Claude Code раскладывает истории по зависимостям и формирует план передачи в разработку. Запускается по просьбе упорядочить истории, составить волны или создать sprint-status.yaml.

MIT 104 установок ★ 493 обновлён 2026-06-20

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add aj-geddes/claude-code-bmad-skills --skill bmad-sprint-planning -a claude-code
Открыть на GitHub

Что делает bmad-sprint-planning

Скилл читает PRD, архитектуру, эпики и истории из bmad-output/, строит граф зависимостей и записывает очередность в bmad-output/sprint-status.yaml. Истории в одной волне могут выполняться параллельно, если у них нет взаимных зависимостей и области owned_scope не пересекаются. Для создания и сортировки предусмотрены скрипты init-sprint-status.sh и sequence-stories.sh.

Первая волна получает статус ready-for-dev, остальные — backlog; дальше статусы отражают ход передачи от разработки до завершения. Скилл также умеет обновлять план после завершения или добавления истории и проверять последовательность без записи. Он не пишет код, не запускает тесты и не считает velocity или burndown. Для работы нужны планировочные файлы в bmad-output/; скрипты запускаются через bash.

Какие задачи решает

  • упорядочить истории по эпикам и зависимостям
  • разбить истории на волны для параллельной разработки
  • создать или обновить sprint-status.yaml
  • найти истории, заблокированные незавершёнными зависимостями

Примеры запросов агенту

  • Составь план спринта и создай sprint-status.yaml по эпикам и историям в bmad-output/.
  • Разбей истории на волны и проверь пересечения owned_scope.
  • История завершена: обнови зависимости и открой готовые к разработке истории.

Как установить bmad-sprint-planning

1Через Skills CLI (Vercel)

npx skills add aj-geddes/claude-code-bmad-skills --skill bmad-sprint-planning -a claude-code

2Вручную: положить файлы

~/.claude/skills/bmad-sprint-planning/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/bmad-sprint-planning/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о bmad-sprint-planning

Как установить bmad-sprint-planning в Claude Code?

Выполни npx skills add aj-geddes/claude-code-bmad-skills --skill bmad-sprint-planning -a claude-code. Файл скилла устанавливается по пути ~/.claude/skills/bmad-sprint-planning/SKILL.md.

Что делает bmad-sprint-planning?

Он упорядочивает истории по эпикам и зависимостям, распределяет их по волнам и создаёт или обновляет bmad-output/sprint-status.yaml. Реализацию кода и тестирование скилл не выполняет.

Как скилл определяет, какие истории можно выполнять параллельно?

Он группирует истории по уровням графа зависимостей. В одной волне истории не должны зависеть друг от друга и должны иметь непересекающиеся области owned_scope.

Исходный текст

SKILL.md · MIT
---
name: bmad-sprint-planning
description: |
  Orchestration handoff bridge: emits and maintains sprint-status.yaml as the project's
  sequencing system-of-record. Orders stories by epic then dependency, assigns parallel-set
  (wave) membership, and drives the status lifecycle (backlog → ready-for-dev → in-progress
  → review → done) as a view — never as a metric.

  Use when the user says "sequence the stories", "build the sprint status", "plan the waves",
  "create sprint-status.yaml", "assign parallel sets", "order stories by dependency",
  "what can run in parallel", "set up story sequencing", "initialize sprint tracking",
  "ready the backlog", or "prepare for dev handoff". Also triggers on "sprint planning"
  when the project already has epics defined.

  SCOPE: SEQUENCING AND ORCHESTRATION ONLY. No velocity, no burndown, no committed points,
  no coverage metrics. Capacity is expressed as wave width (concurrent story count), not
  points. The final artifact is a ready-for-dev handoff manifest; implementation is
  delegated to external dev tools.
allowed-tools: Read, Write, Edit, Bash, Glob, Grep, TodoWrite
---

# BMAD Sprint Planning

**Role:** Sequencing & Handoff Bridge — Phase 4 orchestration  
**System-of-record:** `bmad-output/sprint-status.yaml`

---

## What This Skill Does

1. Reads planning artifacts (PRD, architecture, epics, stories) from `bmad-output/`.
2. Derives a dependency graph across all stories.
3. Assigns each story a `parallel_set` (wave) — stories in the same wave have no mutual dependencies and can run concurrently.
4. Emits `bmad-output/sprint-status.yaml` using the canonical template.
5. Marks the first wave of stories `ready-for-dev`; all others remain `backlog`.
6. Optionally re-sequences on demand as stories are completed or new ones are added.

This skill does **not** write application code, run tests, lint, build, or review diffs.

---

## Three-Intent Operation

| Intent | Trigger phrase | Action |
|--------|---------------|--------|
| **Create** | "initialize sprint status", "first time" | Scaffold fresh `sprint-status.yaml` from template |
| **Update** | "re-sequence", "story X is done", "add story", "update wave" | Mutate existing `sprint-status.yaml` in-place |
| **Validate** | "check sequencing", "are dependencies correct", "show wave plan" | Read and report without writing |

---

## Workflow — Create

1. **Load planning artifacts**
   ```
   Glob: bmad-output/**/*.md, bmad-output/**/*.yaml
   ```
   Priority order: `epics.md` → `prd.md` → `architecture.md` → individual story files.

2. **Extract epics and stories**
   - Parse all story IDs: format `{epic}.{story}.{slug}.story.md` (e.g., `2.1.stripe-integration.story.md`)
   - Derive epic ordering from the epic list in `epics.md` or `prd.md`

3. **Build dependency graph**
   - Read `dependencies[]` from each story's frontmatter or Dev Notes section
   - Topological sort: stories with no unmet dependencies → wave 1; stories unblocked after wave 1 → wave 2; etc.

4. **Initialize sprint-status.yaml**
   ```bash
   bash ${CLAUDE_PLUGIN_ROOT}/skills/bmad-sprint-planning/scripts/init-sprint-status.sh
   ```
   Then populate with sequenced data (see template).

5. **Sequence stories**
   ```bash
   bash ${CLAUDE_PLUGIN_ROOT}/skills/bmad-sprint-planning/scripts/sequence-stories.sh
   ```

6. **Set initial statuses**
   - Wave 1 stories: `status: ready-for-dev`
   - All other stories: `status: backlog`
   - Epics: `status: in-progress` if any child story is ready-for-dev; else `backlog`

7. **Emit handoff summary** — list wave 1 stories by `owned_scope` for conflict-free parallel dispatch

---

## Workflow — Update

When a story moves to `done`:
1. Remove it from any `dependencies[]` lists where it appears
2. Identify newly unblocked stories (dependencies now fully satisfied)
3. Promote them to `ready-for-dev`
4. Re-evaluate parent epic status
5. Write updated `sprint-status.yaml`

---

## Parallel Set Assignment

Wave width (how many stories can run at once) is not a fixed number — it is the size of the dependency-free frontier at each topological level. There is no points budget or velocity ceiling.

```
Wave 1: all stories with no dependencies
Wave 2: all stories whose only dependencies are in wave 1
Wave N: all stories whose dependencies are fully in waves 1…(N-1)
```

Stories within a wave MUST have non-overlapping `owned_scope` to be safe for parallel dispatch. If two stories in the same wave share a file, split them into separate waves or document the conflict.

---

## Status Lifecycle (view, not metric)

```
backlog → ready-for-dev → in-progress → review → done
```

- This is a **view** of sequencing state, not a tracking instrument.
- Transitions are triggered by external signals (dev tool reports, user command).
- This skill never computes velocity, burndown, or completion rates from these statuses.

---

## Scale-Adaptive Track Guidance

| Track | Story count | Sprint-status behavior |
|-------|-------------|----------------------|
| Quick Flow | 1–15 | Single wave pass; minimal epic structure |
| BMAD Method | 10–50+ | Full wave assignment; epic grouping |
| Enterprise | 30+ | Multi-phase wave planning; dependency map documented in REFERENCE |

Track is confirmed with the user before generating the status file.

---

## Subagent Strategy

**Pattern:** Parallel dependency analysis  
**Use when:** 15+ stories across 3+ epics

| Agent | Task | Output |
|-------|------|--------|
| Agent 1 | Parse all story files, extract dependency declarations | `bmad-output/context/dependency-raw.yaml` |
| Agent 2 | Parse epic ordering from PRD/epics.md | `bmad-output/context/epic-order.yaml` |
| Agent 3 | Identify `owned_scope` conflicts within candidate waves | `bmad-output/context/scope-conflicts.md` |

Main context: merge outputs, run topological sort, write `sprint-status.yaml`.

### Example subagent prompt
```
Task: Extract dependencies from all story files
Context: Read all *.story.md files under bmad-output/stories/
Objective: For each story, output its id and its dependencies[] list
Output: Write YAML list to bmad-output/context/dependency-raw.yaml

Format:
- id: "2.1.stripe-integration"
  dependencies: ["1.3.user-auth"]
- id: "2.2.payment-webhook"
  dependencies: ["2.1.stripe-integration"]
```

---

## Scripts

### `init-sprint-status.sh`
Scaffolds `bmad-output/sprint-status.yaml` from the template if it does not exist.

```bash
bash ${CLAUDE_PLUGIN_ROOT}/skills/bmad-sprint-planning/scripts/init-sprint-status.sh \
  [project-name] [output-dir]
```

### `sequence-stories.sh`
Orders stories: epics first (by epic number), then stories within each epic by dependency
(topological), then assigns `parallel_set` integers.

```bash
bash ${CLAUDE_PLUGIN_ROOT}/skills/bmad-sprint-planning/scripts/sequence-stories.sh \
  [sprint-status-file]
```

---

## Template

`${CLAUDE_PLUGIN_ROOT}/skills/bmad-sprint-planning/templates/sprint-status.template.yaml`

Fields: `epics[]`, `stories[]` (with `id`, `title`, `status`, `dependencies`, `parallel_set`,
`owned_scope`). The template contains **no** velocity, burndown, or points fields.

---

## Key Guidelines

1. **Load context first** — always read existing `sprint-status.yaml` before writing
2. **Use TodoWrite** to track multi-step sequencing workflows
3. **Respect owned_scope** — flag conflicts before assigning same-wave membership
4. **No metrics** — if a field resembles velocity, points, or burndown, remove it
5. **Handoff clearly** — conclude every Create/Update with the list of `ready-for-dev` stories and their `owned_scope`
6. **Decision log** — append sequencing decisions to `bmad-output/decision-log.md`

---

> ---
> Part of the **BMAD Planning & Orchestrator** plugin — a Claude Code harness for the **BMAD Method** by the **BMAD Code Organization** (https://github.com/bmad-code-org/BMAD-METHOD). Implements the spirit of `bmad-sprint-planning`. All methodology credit belongs to the BMAD Code Organization.

© aj-geddes · MIT · aj-geddes/claude-code-bmad-skills

Похожие скиллы

Все скиллы по теме «Настройка агента: память, контекст, субагенты» →
sprint-planning официальный anthropics Скилл sprint-planning для Claude Code, Codex, Cursor, GitHub Copilot и Gemini CLI, который помогает распланировать спринт: оценить ёмкость команды с учётом отгулов и встреч, расставить приоритеты бэклога и сформировать документ плана. CX Codex +1 3 300установок agile-sprint-planning aj-geddes Скилл agile-sprint-planning помогает подготовить спринт: сформулировать цели, оценить задачи в story points, распределить бэклог с учётом ёмкости команды и провести дейли. CX Codex +1 680установок sprint-plan Donchitos Скилл sprint-plan для Claude Code, Codex, Cursor, GitHub Copilot и Gemini CLI, который строит план спринта из бэклога, закрытых задач и доступной ёмкости команды. Запускается тремя режимами: new, update и status. CX Codex +1 667установок bmad-brainstorming bmad-code-org Скилл bmad-brainstorming для Claude Code и других платформ ведёт сессию брейншторма: агент задаёт вопросы по одной, меняет креативные техники и копит идеи в memlog. CX Codex +1 17 900установок bmad-agent-pm bmad-code-org Скилл bmad-agent-pm для Claude Code и Cursor выступает в роли менеджера продуктов Джона для написания, обновления и проверки планов проектов. CX Codex +1 17 800установок bmad-idea akillness Скилл bmad-idea превращает сырую идею в один концепт-артефакт и подсказывает, к какому скиллу идти дальше. Нужен до PRD и спринт-планов. CX Codex +1 368установок

Из того же набора11

Весь набор →
bmad-brainstorm Скилл bmad-brainstorm запускает структурированные мозговые штурмы по методикам вроде SCAMPER, SWOT и «5 почему». Формирует отчёт с выводами для дальнейшего планирования. CX Codex +1 130установок bmad-tech-spec Скилл bmad-tech-spec для Claude Code создаёт компактный техспек для небольших фич вместо полного PRD и архитектуры. Он собирает один артефакт перед разработкой историй. CX Codex +1 114установок bmad-spec Скилл bmad-spec для Claude Code превращает заметки, PRD или расшифровку в короткий файл SPEC.md с пятью разделами. Он включается, когда нужно сформулировать задачу и границы проекта. CX Codex +1 108установок bmad-readiness-check Скилл bmad-readiness-check для Claude Code сверяет документы планирования перед началом разработки. Запускается по просьбе проверить готовность требований, архитектуры и эпиков к реализации. CX Codex +1 107установок bmad-document-project Скилл bmad-document-project для Claude Code сканирует готовый репозиторий в режиме чтения и сохраняет файл project-documentation.md. Документ фиксирует стек и архитектуру перед планированием дальнейших задач. CX Codex +1 104установок bmad-investigate Скилл bmad-investigate для Claude Code расследует баги и оформляет факты в case file. Запускается по запросу найти причину ошибки, разобрать инцидент или обновить расследование. CX Codex +1 102установок bmad-builder Скилл bmad-builder для Claude Code создаёт и проверяет новые скиллы планирования в плагине BMAD. Генерирует структуру каталогов и следит, чтобы логика не выходила за рамки оркестрации. CX Codex +1 102установок bmad-init Скилл bmad-init для Claude Code разворачивает рабочую область планирования BMAD. Запускается при старте нового проекта, чтобы выбрать масштаб и создать стартовые документы. CX Codex +1 100установок

Спонсоры проекта

Компании, которые помогают держать аналитику открытой