AnnualReports — скилл для Claude Code: годовые отчёты по ИБ
Скилл AnnualReports сводит сотни годовых отчётов по кибербезопасности в один каталог, находит нужный и собирает тренды по вендорам со ссылкой на источник.
MIT 1 установок ★ 19 959 обновлён 2026-10-28
npx skills add danielmiessler/LifeOS --skill annualreports -a claude-codeЧто делает AnnualReports
Скилл держит один индекс годовых отчётов по кибербезопасности: CrowdStrike, Mandiant, IBM, Verizon, Microsoft, CISA, OWASP, Wiz, Palo Alto и другие вендоры, разложенные по категориям вроде threat intel, ransomware, breaches, AppSec, cloud, AI, identity и pentest. В поставке уже лежит каталог на 492 отчёта в 21 категории, поэтому список и загрузка работают сразу после установки.
Работа идёт в трёх режимах. UPDATE переписывает Data/sources.json из списка awesome-annual-security-reports на GitHub и печатает только счётчики добавленных и удалённых отчётов. ANALYZE отвечает на вопрос по трендам и обязан называть вендора, год и отчёт под каждой цифрой, а также перечислять вендоров, которых в ответе нет. FETCH сохраняет выжимку страницы отчёта в Reports/<vendor>/.
Инструменты — это .ts-файлы, которые запускаются через bun: без него ни список, ни загрузка не пойдут. Аккаунт и ключи не нужны, но большинство полных PDF вендоры отдают только после регистрации, поэтому на выходе чаще будет страница отчёта, а не файл. Запросы помечаются LifeOS-AnnualReports/1.0 и контактом из Config.md, если он задан.
Какие задачи решает
- Найти отчёт Verizon DBIR и ссылку на него
- Свести цифры по программам-вымогателям из отчётов разных вендоров
- Обновить каталог источников из списка на GitHub
- Сохранить страницу отчёта вендора с выжимкой
- Показать, каких вендоров не хватает в готовом анализе
Примеры запросов агенту
- Обнови каталог годовых отчётов и скажи, сколько добавилось и сколько ушло.
- Проанализируй отчёты по программам-вымогателям за последние годы.
- Найди в каталоге отчёты IBM и сохрани выжимку по последнему.
Как установить AnnualReports
1Через Skills CLI (Vercel)
npx skills add danielmiessler/LifeOS --skill annualreports -a claude-code2Вручную: положить файлы
~/.claude/skills/AnnualReports/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/AnnualReports/
1Через Skills CLI (Vercel)
npx skills add danielmiessler/LifeOS --skill annualreports -a codex2Вручную: положить файлы
.agents/skills/AnnualReports/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add danielmiessler/LifeOS --skill annualreports -a cursor2Вручную: положить файлы
.cursor/skills/AnnualReports/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install danielmiessler/LifeOS LifeOS/install/skills/AnnualReports2Вручную: положить файлы
.github/skills/AnnualReports/SKILL.md1Через Skills CLI (Vercel)
npx skills add danielmiessler/LifeOS --skill annualreports -a gemini-cli2Командой платформы
gemini skills install https://github.com/danielmiessler/LifeOS --path LifeOS/install/skills/AnnualReportsВручную: положить файлы
.devin/skills/AnnualReports/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add danielmiessler/LifeOS --skill annualreports -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы об AnnualReports
Как установить AnnualReports в Claude Code?
Выполни npx skills add danielmiessler/LifeOS --skill AnnualReports -a claude-code. Скилл окажется в ~/.claude/skills/AnnualReports/SKILL.md.
Что делает AnnualReports?
Держит каталог годовых отчётов по кибербезопасности и работает в трёх режимах: обновление списка источников, анализ трендов по вендорам и загрузка конкретного отчёта с выжимкой.
Это заменяет живой фид угроз?
Нет, скилл работает с годовыми отчётами, а не с потоком событий или поиском по CVE. У отчётов есть лаг публикации: отчёты 2026 года описывают данные 2025-го.
Исходный текст
SKILL.md · MIT
---
name: AnnualReports
metadata:
short-description: "Find, fetch, update, and analyze cybersecurity annual reports and breach or threat trends. Excludes real-time feeds and live CVE lookup."
version: 1.0.9
evals:
deterministic:
- command: "bun skills/AnnualReports/Tools/UpdateSources.ts --dry-run | grep -Eq 'Total parsed: [1-9]'"
lane: integrity
falsifier: "the upstream README cannot be fetched, or its entry format drifted so the parser yields zero reports"
manual:
reason: "Source freshness and cross-report synthesis depend on the requested live report set and cannot be proven safely from a static fixture."
falsifier: "The delivered analysis omits the consulted reports, attributes a figure to the wrong report year, or leaves a requested fetch unavailable without reporting it."
description: "Aggregate several hundred cybersecurity annual reports from CrowdStrike, Mandiant, IBM, Verizon, Microsoft, CISA, OWASP, Wiz, Palo Alto across 19+ categories (threat intel, ransomware, breaches, AppSec, cloud, AI, identity, pentest). Intents: UPDATE, ANALYZE, FETCH. USE WHEN annual reports, threat reports, vendor reports, ransomware trends, breach stats, DBIR, IBM Cost of Breach, threat landscape, CISO report, CVE trends. NOT FOR real-time threat feeds or live CVE lookup."
---
# AnnualReports - Security Report Aggregation
**Contents:** Ideal State · Anti-criteria · Intent Routing · Tool contract · Data & Config · Gotchas · Examples
Keeps one indexed catalog of several hundred annual cybersecurity reports, fetches the ones that answer a question, and synthesizes trends across vendors with every figure traceable to its source.
**Source:** [awesome-annual-security-reports](https://github.com/jacobdjwilson/awesome-annual-security-reports)
## Ideal State
- UPDATE leaves `Data/sources.json` refreshed from the upstream awesome-annual-security-reports GitHub list, and the counts of added and removed reports are reported.
- FETCH leaves a summary of the requested vendor report page saved under `Reports/<vendor>/`, with a note that most full PDFs need registration, and a listing request returns the reports in the asked category with their direct URLs; a requested fetch that could not be completed is reported as unavailable.
- An ANALYZE answer names the vendors consulted, and also the ones absent from the answer. A ransomware synthesis that skipped Sophos says so, because the gap changes how much weight the numbers carry.
- In an ANALYZE answer, every figure carries its vendor, its year, and the report it came from, and where vendors disagree, the disagreement is named and both numbers stand.
- The publication lag is stated once (2026 reports cover 2025 data) so a trend read isn't mistaken for this-minute data.
## Anti-criteria
- Never silently average disagreeing vendors' numbers into one clean figure that no source actually published.
- Never attribute a figure to the wrong report year, and never ship a stat without its vendor, year and report.
- Never leave a requested fetch unavailable without reporting it.
- Never conflate different vendors' terminology: each vendor has their own threat actor naming conventions.
## Intent Routing
The skill is one intent with three modes, UPDATE, ANALYZE and FETCH, each run through a tool in § Tool contract.
| File | Read when |
|------|-----------|
| `Setup.md` | first install, the optional PREFERENCES.md, proving the tools work |
## Tool contract
| Mode | Trigger | Tool |
|------|---------|------|
| UPDATE | "update the annual reports", refresh report sources from GitHub | `Tools/UpdateSources.ts` |
| ANALYZE | "analyze X reports", trends/insights across vendors | `Tools/ListSources.ts` + content analysis |
| FETCH | "download/fetch report Y", specific vendor report | `Tools/FetchReport.ts` |
```bash
# Update sources from GitHub
bun run ${LIFEOS_SKILL_DIR}/Tools/UpdateSources.ts
# List all sources (no argument prints every category with its current count)
bun run ${LIFEOS_SKILL_DIR}/Tools/ListSources.ts [category]
bun run ${LIFEOS_SKILL_DIR}/Tools/ListSources.ts --search <term> # match vendor or report name
bun run ${LIFEOS_SKILL_DIR}/Tools/ListSources.ts --vendor <name> # every report from one vendor
# Fetch a specific report (vendor and name match as case-insensitive substrings)
bun run ${LIFEOS_SKILL_DIR}/Tools/FetchReport.ts <vendor> <report-name>
bun run ${LIFEOS_SKILL_DIR}/Tools/FetchReport.ts --url <url> # fetch a page not in the catalog
bun run ${LIFEOS_SKILL_DIR}/Tools/FetchReport.ts --list-cached # list summaries already saved under Reports/
```
## Data & Config
Optional user preferences live at `<configRoot>/LIFEOS/USER/CUSTOMIZATIONS/SKILLS/AnnualReports/PREFERENCES.md` (configRoot is `$CLAUDE_CONFIG_DIR` when set, else `~/.claude`). When it exists, apply it over the defaults; when it does not, the defaults stand. The skill needs no account or secret. First install and the proof commands: [Setup.md](Setup.md).
A seed catalog ships with the skill, so ListSources and FetchReport work on a fresh install; UPDATE refreshes it from upstream. If the catalog is deleted, the tools exit with the instruction to run `Tools/UpdateSources.ts`.
- `Data/sources.json` - All report sources with metadata (ships as a seed, rewritten by `Tools/UpdateSources.ts`)
- `Reports/` - Downloaded report files (created by `Tools/FetchReport.ts` on first fetch)
## Gotchas
- **Category counts drift with the upstream list.** `Tools/ListSources.ts` prints the current ones. The shipped seed (parsed 2026-10-14) holds 492 reports across 21 categories.
- **UPDATE reports counts, never entries.** It prints `New reports` and `Removed reports` counts only, and `--diff` lists only new category keys. Report the counts as printed and never present a list of changed entries the tool did not print.
- **A failed fetch saves nothing.** A fetch error, an HTTP error status, a PDF URL or an unknown report prints the reason to stderr and exits 1, with no summary file written. Report the reason as unavailable.
- **Requests declare this tool.** FetchReport sends `LifeOS-AnnualReports/1.0`, plus the `contact` address from `Config.md` when set (see `Setup.md`), so a vendor site can see who is fetching.
## Examples
```
User: "Update the annual reports"
→ UPDATE
→ Data/sources.json matches the upstream README, and the counts of added and removed reports are reported
```
```
User: "What threat reports are available?"
→ FETCH listing
→ The Global Threat Intelligence category's reports, each with its vendor and direct URL
```
```
User: "Analyze ransomware reports"
→ ANALYZE
→ A cross-vendor trend analysis where every figure names its vendor, year and report, and the vendors left out are named
```
© danielmiessler · MIT · danielmiessler/LifeOS