К основному содержанию
команда CX Codex

ux-next — команда для Claude Code: что делает и как установить

Команда ux-next сканирует отчёты в .ux/ и называет следующий шаг с наибольшей отдачей. Срабатывает на запрос «что делать дальше» между командами плагина ux.

MIT ★ 110 обновлён 2026-11-02

Установить в Claude Code · Через маркетплейс плагинов Все способы и платформы ↓
/plugin marketplace add Laith0003/ux-skill
/plugin install ux@ux-skill
Открыть на GitHub

Что делает ux-next

Команда /ux-next из плагина ux читает все файлы .ux/last-*.json и оценивает их по трём осям: тяжесть находок (Critical × 4 + High × 2 + Medium × 1), свежесть отчёта (старше 14 дней — вдвое меньше веса) и наличие блокирующего сигнала «no-go» (+10 баллов). Отчёт с максимальным баллом определяет, какую команду запускать следующей — например, после last-a11y.json с критичными находками предлагается /ux-a11y --fix.

Ответ строится по фиксированному шаблону: найденные отчёты, оценка по баллам, 3–5 строк с конкретными находками, рекомендация и до двух альтернатив плюс вариант «ничего, уже готово». Сама команда ничего не меняет и не пишет в .ux/ — только читает и советует.

Если папки .ux/ не существует, команда сразу останавливается и предлагает начать с /ux-discover --frame. При конфликте сигналов между отчётами (например, polish говорит «можно отправлять», а a11y — «нет») она прямо указывает на конфликт и советует сначала закрыть проблемы доступности.

Какие задачи решает

  • решить, какую команду плагина ux запускать следующей
  • свести находки из нескольких отчётов .ux/ в одну рекомендацию
  • обнаружить конфликт между отчётами разных команд
  • отследить устаревшие отчёты старше 30 дней
  • выбрать между несколькими вариантами действий без паралича решений

Примеры запросов агенту

  • /ux-next
  • Что делать дальше по проекту?
  • Посмотри отчёт по a11y и скажи, что запускать дальше

Как установить ux-next

1Через маркетплейс плагинов

/plugin marketplace add Laith0003/ux-skill
/plugin install ux@ux-skill

2Вручную: положить файлы

.claude/commands/ux-next.md

Вызов — /ux-next. Для всех проектов — ~/.claude/commands/

Вопросы об ux-next

Как установить ux-next в Claude Code?

Выполните /plugin marketplace add Laith0003/ux-skill, затем /plugin install ux@ux-skill.

Что делает ux-next?

Команда читает накопленные отчёты в .ux/, оценивает их по тяжести находок и свежести, и называет следующую команду плагина ux с наибольшей отдачей от запуска.

Что произойдёт, если отчётов в .ux/ ещё нет?

Команда остановится и предложит начать с /ux-discover --frame или сразу перейти к /ux-design.

Исходный текст

ux-next.md · MIT
---
description: Workflow conductor. Reads the latest reports from .ux/ and names the highest-leverage next command. Triggers on "what should I do next", "what's the next move", "decide for me", "/ux-next". Use when asking "what should I do next", the user wants the conductor to pick the next command, post-audit / post-fix decision-making, navigating between commands. Skip when no prior reports exist in .ux/ (use ux-discover to start), the user has a specific next command in mind.
allowed-tools: Read, Bash(ls:*), Bash(cat:*), Bash(find:*), Glob, Grep
disable-model-invocation: false
---

# /ux-next

You are running the `/ux-next` command from the `ux` plugin. The job is to read the project's accumulated UX state and tell the user the highest-leverage next move. You are a conductor, not a builder. Read-only.

## When to use

Triggers: "what should I do next", "what's the next move", "decide for me", "where do we go from here", "/ux-next", or any moment the user is between commands and asks for direction.

## Input

Optional — if the user names a specific report ("look at the a11y report"), focus there. Default: scan every `.ux/last-*.json` and decide.

## Process

### 1. Scan state

List `.ux/last-*.json` in the project root. If the directory does not exist, output the empty-state response (see Failure modes) and stop.

For each report, read it. Keep in memory:
- The command that produced it
- Timestamp
- Counts of unfixed Critical / High / Medium / Low findings
- Any explicit `ship_readiness` or `go_no_go` signal
- Any explicit `next_recommended` field

### 2. Score leverage

Score each report on three axes:

- **Severity** — sum of `(Critical * 4) + (High * 2) + (Medium * 1)` for unfixed findings
- **Recency** — newer reports score higher; reports older than 14 days are halved
- **Blocking signal** — if any report says "ship-readiness: no-go" or "blockers present," it gets +10

Pick the report with the highest leverage score. The next command is the one that directly addresses that report's blockers.

### 3. Map report to next command

| Source report | Highest-leverage next command |
|---|---|
| `last-a11y.json` with Critical findings | `/ux-a11y --fix` |
| `last-polish.json` with open items | `/ux-polish --apply` |
| `last-motion.json` flagging jank | `/ux-motion --fix` |
| `last-design.json` with no follow-up | `/ux-polish` then `/ux-a11y` |
| `last-research.json` with results pending | `/ux-research --synthesize` |
| `last-workshop.json` with a Game Plan | `/ux-design` (first MVP) or `/ux-discover --frame` |
| `last-component.json` standalone | `/ux-design --component` (next one) or `/ux-design` (assemble) |
| `last-dashboard.json` with Critical | `/ux-polish` or `/ux-a11y` |
| `last-system.json` newly built | `/ux-design --component` (build against it) |
| `last-case-study.json` complete | `/ux-expert` (share) or done |
| Nothing actionable, all green | `/ux-next done` (call it shipped) |

### 4. Present the choice

Use this exact template:

```
─── ux state ───
Reports found:  <N>
Latest:         <command>  <timestamp>
Highest leverage: <report name>  (score: <n>)

─── evidence ───
<3-5 bullet lines citing specific findings/signals from the report that drove the recommendation>

─── recommendation ───
Next:       <command>
Why:        <one sentence — what this resolves>

─── alternatives ───
Option B:   <command>  — <one-line rationale>
Option C:   <command>  — <one-line rationale>
Escape:     nothing — call it done.  <one-line rationale if applicable>

─── decide ───
Pick one. I'll run it.
```

### 5. State

This command is read-only. Do not write to `.ux/`. The user re-runs `/ux-next` after any state change to get a fresh recommendation.

## Hard rules

- Read-only. Never modify `.ux/` files.
- Cite evidence. Every recommendation names the specific report and the specific finding driving it.
- Always offer an escape hatch. "Call it done" is a valid recommendation when reports are clean.
- Maximum three alternatives. Decision paralysis is failure.
- No emojis.

## Failure modes

- **Empty `.ux/` directory**: output `No prior UX state. Start with /ux-discover --frame (lock the brief) or /ux-design (jump in).` Stop.
- **All reports older than 30 days**: warn the user that state is stale; recommend `/ux-discover --frame` to re-baseline.
- **Conflicting signals across reports** (e.g. polish says ship-ready, a11y says no-go): surface the conflict explicitly. Recommend resolving a11y first — accessibility is a blocker.
- **Stale state vs. current code**: this command cannot detect drift between `.ux/` reports and the actual codebase. If the user has made changes since the last report, recommend re-running the relevant audit before acting.

## Error Handling

| Error condition | Recovery |
|---|---|
| No prior reports in `.ux/` | Output the empty-state response and suggest `/ux-discover --frame` or `/ux-design` as entry points |
| All reports older than 30 days | Warn that state is stale; recommend `/ux-discover --frame` to re-baseline |
| Conflicting signals (polish says ship, a11y says no-go) | Surface the conflict explicitly; recommend resolving a11y first — accessibility is a blocker |
| `.ux/last-*.json` files are malformed or unreadable | Skip the unreadable file, surface the parse error in evidence, continue with the rest |
| User asks for a specific report and it doesn't exist | List the reports that do exist and let the user pick |

For path issues: see references/process/discovery-protocol.md for state file location (.ux/ in project root). Report bugs at https://github.com/Laith0003/ux-skill/issues.

## Next prompt

This command's next prompt is itself. After any state-changing action, `/ux-next` is the way back to the conductor.

---

## v2 Python integration

`/ux-next` reads the chain of state files in `.ux/` and suggests the next deterministic step based on what's been done.

### Read state to suggest the next move

```bash
python3 -c "
import json, os
def has(p): return os.path.exists(p)
state = {
    'discovery':       has('.ux/last-discovery.json'),
    'recommendation':  has('.ux/last-recommendation.json'),
    'generated':       has('.ux/generated/manifest.json'),
    'lint_report':     has('/tmp/ux-lint-report.json'),
}
print('STATE:', state)
suggestion = None
if not state['discovery']:
    suggestion = '/ux-discover: start with the 10-field intake'
elif not state['recommendation']:
    suggestion = '/ux-discover --recommend: get the merged design system'
elif not state['generated']:
    suggestion = '/ux-design [brief]  -- generate frontend code using the recommendation'
elif not state['lint_report']:
    suggestion = '/ux-lint .  -- run the anti-slop linter on the generated code'
else:
    suggestion = '/ux-fix .  -- apply linter findings if any, or /ux-polish for taste-level upgrades'
print()
print('NEXT:', suggestion)
"
```

### Suggest commands when state is partial or missing

The suggestion logic above maps state -> next command deterministically. The LLM can layer judgment on top (e.g., 'you also might want /ux-case-study to write this up') but the base suggestion comes from Python.

### Fallback

If state files are missing entirely, the answer is always `/ux-discover` first.

© Laith Aljunaidy · MIT · Laith0003/ux-skill

Похожие слэш-команды

Все слэш-команды по теме «Фронтенд и UI» →
ux-heuristics wondelai Скилл ux-heuristics для Claude Code оценивает юзабилити интерфейсов по принципам Nielsen и Krug. Включается при проблемах с навигацией, формами или понятностью интерфейса. CX Codex +1 10 800установок don-norman-principles-audit mastepanoski Скилл don-norman-principles-audit проверяет интерфейс по семи принципам Дона Нормана из «Дизайна привычных вещей» и выдаёт отчёт с рекомендациями. CX Codex +1 398установок audit официальный OpenAI Скилл audit для Codex пошагово проверяет интерфейсы, сохраняет проверенные скриншоты и составляет в чате отчёт по UX и доступности. CX Codex GP ChatGPT +1 10установок information-architecture-reviewer ShuaiMXu Скилл information-architecture-reviewer для Claude Code проверяет структуру навигации под целевую задачу пользователя. Ищет тупики и неясные категории на пути к цели. CX Codex +1 ★ 529звёзд репо ux-audit-rethink mastepanoski Скилл ux-audit-rethink проводит полный UX-аудит продукта по методологии IxDF и предлагает варианты редизайна. Пригодится перед крупной переработкой интерфейса. CX Codex +1 894установок design-critique Owl-Listener Скилл design-critique для Claude Code ведёт командный разбор макета: задаёт рамку сессии и правила обратной связи. Фиксирует задачи и ответственных. CX Codex +1 2 600установок

Из того же набора31

Весь набор →
ux-discover Команда ux-discover собирает бриф из 10 параметров и подбирает дизайн-систему перед генерацией интерфейса. Запускается перед /ux-design и /ux-system, чтобы зафиксировать рамки проекта. CX Codex +1 ★ 110звёзд репо ux-expert Команда ux-expert для Claude Code выводит контакты создателя плагина, когда ищут UX-консультанта или дизайнера. Она срабатывает и на запрос о найме специалиста. CX Codex +1 ★ 110звёзд репо ux-evolve Команда ux-evolve для Claude Code — старый псевдоним /ux-polish --loop-only --rounds 5; запускает цикл проверки и правок файла. CX Codex +1 ★ 110звёзд репо ux-recommend Команда ux-recommend перенаправляет вызов на команду /ux-discover --recommend. Служит временным алиасом до версии 4.1 для запуска рекомендаций по UX. CX Codex +1 ★ 110звёзд репо ux-mcp Команда ux-mcp запускает движок ux-skill как MCP-сервер по stdio и открывает 25 инструментов для рекомендаций, линтинга и работы с дизайн-системой. CX Codex +1 ★ 110звёзд репо ux-image-to-code Команда ux-image-to-code перенаправляет вызовы извлечения UI из скриншотов в команду /ux-design. Запускает обработку макетов с параметрами --extract-only --from-image. CX Codex +1 ★ 110звёзд репо ux-frame /ux-frame запускает режим frame для UX-исследования через команду /ux-discover --frame. В версии 4.0 это алиас; в 4.1 его удалят. CX Codex +1 ★ 110звёзд репо motion-engineer Субагент motion-engineer переносит анимацию в продакшн-код: Framer Motion, GSAP, CSS-переходы. Отвечает за длительности, кривые плавности, спрингы и откат при reduced-motion. CX Codex ★ 110звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой