linux-kernel-modules — скилл для Claude Code: модули ядра Linux

---
name: linux-kernel-modules
description: Linux kernel module skill for writing and debugging loadable kernel modules. Use when writing LKMs with Kbuild, adding module parameters, creating /proc and sysfs entries, implementing character devices, debugging with KGDB or ftrace, or handling module signing for Secure Boot. Activates on queries about Linux kernel modules, loadable modules, Kbuild, module parameters, /proc filesystem, sysfs, character devices, KGDB, or module signing.
---

# Linux Kernel Modules

## Purpose

Guide agents through writing loadable Linux kernel modules (LKMs): the Kbuild build system, module parameters, /proc and sysfs interfaces, character device implementation, kernel debugging with KGDB and `ftrace`, and module signing for Secure Boot.

## Triggers

- "How do I write a Linux kernel module?"
- "How do I add parameters to my kernel module?"
- "How do I create a /proc or sysfs entry?"
- "How do I implement a character device driver?"
- "How do I debug a kernel module with KGDB?"
- "How do I sign a kernel module for Secure Boot?"

## Workflow

### 1. Minimal kernel module

```c
// hello.c — minimal loadable kernel module
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Your Name");
MODULE_DESCRIPTION("Minimal hello world module");
MODULE_VERSION("1.0");

static int __init hello_init(void)
{
    printk(KERN_INFO "hello: module loaded\n");
    return 0;   // non-zero = load failure
}

static void __exit hello_exit(void)
{
    printk(KERN_INFO "hello: module unloaded\n");
}

module_init(hello_init);
module_exit(hello_exit);
```

```makefile
# Makefile — must be exactly this structure for Kbuild
obj-m := hello.o

KDIR := /lib/modules/$(shell uname -r)/build

all:
	$(MAKE) -C $(KDIR) M=$(PWD) modules

clean:
	$(MAKE) -C $(KDIR) M=$(PWD) clean
```

```bash
# Build
make

# Load
sudo insmod hello.ko

# Check it loaded
lsmod | grep hello
dmesg | tail -5       # see printk output

# Unload
sudo rmmod hello

# Show module info
modinfo hello.ko
```

### 2. Module parameters

```c
#include <linux/moduleparam.h>

static int count = 1;
static char *name = "world";

// module_param(variable, type, permissions)
// permissions: 0 = no sysfs entry, S_IRUGO = readable, S_IWUSR = writable
module_param(count, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(count, "Number of times to print (default: 1)");

module_param(name, charp, S_IRUGO);
MODULE_PARM_DESC(name, "Name to greet (default: world)");

static int __init hello_init(void)
{
    int i;
    for (i = 0; i < count; i++)
        printk(KERN_INFO "hello: Hello, %s!\n", name);
    return 0;
}
```

```bash
# Pass parameters at load time
sudo insmod hello.ko count=3 name="kernel"

# Modify at runtime (if S_IWUSR set)
echo 5 > /sys/module/hello/parameters/count
```

### 3. /proc filesystem interface

```c
#include <linux/proc_fs.h>
#include <linux/seq_file.h>

static struct proc_dir_entry *proc_entry;

static int mymod_show(struct seq_file *m, void *v)
{
    seq_printf(m, "Counter: %d\n", my_counter);
    seq_printf(m, "Status: %s\n", my_status ? "active" : "idle");
    return 0;
}

static int mymod_open(struct inode *inode, struct file *file)
{
    return single_open(file, mymod_show, NULL);
}

static const struct proc_ops mymod_fops = {
    .proc_open    = mymod_open,
    .proc_read    = seq_read,
    .proc_lseek   = seq_lseek,
    .proc_release = single_release,
};

static int __init mymod_init(void)
{
    proc_entry = proc_create("mymod", 0444, NULL, &mymod_fops);
    if (!proc_entry)
        return -ENOMEM;
    return 0;
}

static void __exit mymod_exit(void)
{
    proc_remove(proc_entry);
}
```

```bash
cat /proc/mymod
```

### 4. sysfs interface

```c
#include <linux/kobject.h>
#include <linux/sysfs.h>

static struct kobject *mymod_kobj;
static int mymod_value = 42;

static ssize_t value_show(struct kobject *kobj,
                          struct kobj_attribute *attr, char *buf)
{
    return sprintf(buf, "%d\n", mymod_value);
}

static ssize_t value_store(struct kobject *kobj,
                           struct kobj_attribute *attr,
                           const char *buf, size_t count)
{
    sscanf(buf, "%d", &mymod_value);
    return count;
}

static struct kobj_attribute value_attr =
    __ATTR(value, 0664, value_show, value_store);

static int __init mymod_init(void)
{
    mymod_kobj = kobject_create_and_add("mymod", kernel_kobj);
    if (!mymod_kobj) return -ENOMEM;
    return sysfs_create_file(mymod_kobj, &value_attr.attr);
}

static void __exit mymod_exit(void)
{
    sysfs_remove_file(mymod_kobj, &value_attr.attr);
    kobject_put(mymod_kobj);
}
```

```bash
cat /sys/kernel/mymod/value
echo 100 > /sys/kernel/mymod/value
```

### 5. Character device

```c
#include <linux/cdev.h>
#include <linux/fs.h>
#include <linux/uaccess.h>

#define DEVICE_NAME "mydev"
#define BUF_SIZE 1024

static int major;
static struct cdev my_cdev;
static char kernel_buf[BUF_SIZE];

static int mydev_open(struct inode *inode, struct file *file) { return 0; }
static int mydev_release(struct inode *inode, struct file *file) { return 0; }

static ssize_t mydev_read(struct file *f, char __user *buf, size_t len, loff_t *off)
{
    size_t to_copy = min(len, (size_t)BUF_SIZE);
    if (copy_to_user(buf, kernel_buf, to_copy)) return -EFAULT;
    return to_copy;
}

static ssize_t mydev_write(struct file *f, const char __user *buf, size_t len, loff_t *off)
{
    size_t to_copy = min(len, (size_t)(BUF_SIZE - 1));
    if (copy_from_user(kernel_buf, buf, to_copy)) return -EFAULT;
    kernel_buf[to_copy] = '\0';
    return to_copy;
}

static const struct file_operations mydev_fops = {
    .owner   = THIS_MODULE,
    .open    = mydev_open,
    .release = mydev_release,
    .read    = mydev_read,
    .write   = mydev_write,
};

static int __init mydev_init(void)
{
    major = register_chrdev(0, DEVICE_NAME, &mydev_fops);
    if (major < 0) return major;
    printk(KERN_INFO "mydev: registered with major %d\n", major);
    return 0;
}
```

```bash
# Create device node (after loading module)
sudo mknod /dev/mydev c $(cat /proc/devices | grep mydev | awk '{print $1}') 0
echo "test" > /dev/mydev
cat /dev/mydev
```

### 6. Debugging with KGDB and ftrace

```bash
# KGDB — kernel GDB via serial/network
# Boot with: kgdboc=ttyS0,115200 kgdbwait
# Or over network: [email protected]/,@192.168.1.11/

# On debug host:
gdb vmlinux
(gdb) target remote /dev/ttyS0
(gdb) set architecture i386:x86-64:intel
(gdb) info registers

# ftrace — kernel function tracer
echo function > /sys/kernel/debug/tracing/current_tracer
echo mymod_write > /sys/kernel/debug/tracing/set_ftrace_filter
echo 1 > /sys/kernel/debug/tracing/tracing_on
cat /sys/kernel/debug/tracing/trace

# Dynamic debug — enable pr_debug() output
echo "module hello +p" > /sys/kernel/debug/dynamic_debug/control
```

### 7. EXPORT_SYMBOL vs EXPORT_SYMBOL_GPL

```c
// EXPORT_SYMBOL — any module can link (including proprietary)
EXPORT_SYMBOL(my_helper);

// EXPORT_SYMBOL_GPL — only GPL-compatible modules can link
EXPORT_SYMBOL_GPL(gpl_only_fn);
```

Use `EXPORT_SYMBOL_GPL` for symbols that touch GPL-only kernel internals. Loading a non-GPL module that imports GPL symbols fails with a taint warning. Check with `modinfo` and `dmesg` after `insmod`.

### 8. KUnit in-kernel unit tests

```c
// test_mymod.c — compile into module or standalone KUnit module
#include <kunit/test.h>
#include "mymod_internal.h"   // functions under test

static void test_parse_valid(struct kunit *test)
{
    KUNIT_EXPECT_EQ(test, mymod_parse("42"), 42);
}

static struct kunit_case mymod_cases[] = {
    KUNIT_CASE(test_parse_valid),
    {}
};

static struct kunit_suite mymod_suite = {
    .name = "mymod",
    .test_cases = mymod_cases,
};
kunit_test_suite(mymod_suite);
```

```bash
# In-tree KUnit run (kernel tree with CONFIG_KUNIT=y)
./tools/testing/kunit/kunit.py run --filter mymod

# Out-of-tree: enable CONFIG_KUNIT in test kernel or use kunit module target
```

See `skills/kernel/kernel-testing` for full KUnit, kselftest, and syzkaller workflows.

### 9. Rust kernel modules (kernel 6.x + CONFIG_RUST=y)

Requires kernel built with `CONFIG_RUST=y` and appropriate Rust toolchain pinned by the kernel tree.

```rust
// drivers/rust_example/lib.rs
use kernel::prelude::*;

module! {
    type: RustExample,
    name: "rust_example",
    author: "You",
    description: "Rust LKM example",
    license: "GPL",
}

struct RustExample;

impl kernel::Module for RustExample {
    fn init(_module: &'static ThisModule) -> Result<Self> {
        pr_info!("Rust kernel module loaded\n");
        Ok(RustExample)
    }
}
```

```bash
# Build from kernel tree with Rust support enabled
make LLVM=1 rustavailable   # verify Rust toolchain
make M=drivers/rust_example modules
sudo insmod drivers/rust_example/rust_example.ko
```

### 10. Module signing (Secure Boot, kernel 6.x)

Kernel 6.x enforces module signature verification when `CONFIG_MODULE_SIG` is enabled (default on most distro kernels with Secure Boot).

```bash
# Generate signing key (use org PKI in production)
openssl req -new -x509 -newkey rsa:4096 \
    -keyout signing_key.pem -out signing_cert.pem \
    -days 3650 -subj "/CN=Kernel Module Signing/" -nodes

# Sign module (sha256 or sha512 per kernel config)
/usr/src/linux-headers-$(uname -r)/scripts/sign-file \
    sha256 signing_key.pem signing_cert.pem hello.ko

# Verify signature embedded in .ko
modinfo hello.ko | grep signer

# Enroll key for Secure Boot (MOK on UEFI)
sudo mokutil --import signing_cert.pem
# Reboot → MOK Manager → enroll → reboot again

# Kernel lockdown mode check
cat /sys/kernel/security/lockdown
```

With lockdown `integrity` or `confidentiality`, unsigned modules are rejected. Distro kernels may also require keys enrolled in the kernel's built-in trusted keyring (`CONFIG_SYSTEM_TRUSTED_KEYS`).

For Kbuild system details, see [references/kbuild-basics.md](references/kbuild-basics.md).

## Related skills

- Use `skills/kernel/kernel-testing` for KUnit and kselftest harnesses
- Use `skills/kernel/device-drivers` for char/platform driver patterns beyond minimal modules
- Use `skills/kernel/kernel-debugging` for kgdb, ftrace, and kprobes
- Use `skills/observability/ebpf` for userspace kernel tracing without modules
- Use `skills/debuggers/gdb` for GDB session management with KGDB
- Use `skills/binaries/elf-inspection` for inspecting module ELF structure